I have a mix that I call "Rude and Crude".
It is 1/3 BLO (for grain popping), 1/3 polyurethane (for sealing the pores) and 1/3 mineral spirits (for mixing and faster drying). Then I finish with several coats of straight poly for a smooth and glossy (if that is your thing) surface.
It is NOT the end all finish but, it works for me. I've never used Danish oil so, I have nothing to compare it to.
It never hurts to try different things because you just may discover YOUR favorite fast, easy and best looking finish.
Rog
PS it also never hurts to sand each coat of finish with brown paper bag to knock down the little nubs rising from the grain or dust in the air.