« previous next »
Pages: [1] 2   Go Down

Author Topic: Cold Hands  (Read 6434 times)

Rimu

  • Guest
Cold Hands
« on: June 17, 2010, 05:43:55 am »
  I am quite new to scrolling.For the last 12 years or more i have been making Bandsawn Boxes. So for a bit of a change i decided to try scrolling.I took the bull by the horns and imported a Hegner  scroll saw from Australia (No sales here in New Zealand ) A great saw compared with my previous one. I only had one problem  COLD HANDS ! the table always seemed to be just above freezing point whenever i wanted to use the saw. Fine in summer but not so good this time of the year ( our winter )
Wearing gloves wasn't an option so after many enquiries i settled on using a heating cable.
What i had made was a cable with two heating elements rated at 12.1/2 wats each 25 in total with a link between them running on 230 volts . These elements were attached under the table one on each side they were held in place using aluminium adhesive tape. The table now is a treat to work on  and is warm to touch but not hot so there is no chance of the table distorting or warping due to excessive heat. The total cost was NZ $80  and well worth every cent.           :o
Logged

Offline MadHatter

  • *****
  • Hero Member
  • Posts: 808
    • View Profile
Re: Cold Hands
« Reply #1 on: June 17, 2010, 08:54:18 am »
wow very cool idea. :)
Logged

Offline Russ C

  • *****
  • Hero Member
  • Global Moderator
  • Posts: 8458
  • Central Florida - USA
    • View Profile
Re: Cold Hands
« Reply #2 on: June 17, 2010, 09:00:06 am »
My wife hates cold hands too. LOL  ::)

Really though, smart thinking. 
 8)  8)  8)
Logged
russ@simplywoodencreations.com

Keep The Blade On The Line.

cornishpisky

  • Guest
Re: Cold Hands
« Reply #3 on: June 17, 2010, 12:36:04 pm »
Hi Rimu, I have the same problem with cold hands in the winter, my cast iron table attracts the cold like a magnet, i find fingerless gloves or a anglepoise lamp warm things up nicely though...

PS: Anyone ever told you you look remarkably like Bruce Willis?
Logged

Offline GrayBeard

  • *****
  • Hero Member
  • Posts: 7088
  • My DW 788 sends you HUGZZZZ from Missouri, USA!
    • View Profile
Re: Cold Hands
« Reply #4 on: June 17, 2010, 01:20:18 pm »
There is a ready market for an inventor!

Scroll Saw Table Warmer!!

The way the DeWalt stand is made maybe a small clip-on heating lamp mounted under the table toward the rear? Just have to find a way to keep the sawdust from igniting!

~~~GrayBeard~~~
Logged
I never really wanted to grow up....All I wanted was to be able to reach the cookie jar...and play with my DW 788

Dragonlord85

  • Guest
Re: Cold Hands
« Reply #5 on: June 17, 2010, 03:04:54 pm »
Here in Arizona we have to find a way to cool the table down. 110 degree heat tends to make thing a little warm.
Logged

northie66

  • Guest
Re: Cold Hands
« Reply #6 on: June 17, 2010, 05:10:12 pm »
I can hardly concentrate on your question... you look like Bruce Willis... one of my favorite actors  ;D
Logged

Offline Merlin

  • *****
  • Hero Member
  • Posts: 1191
    • View Profile
Re: Cold Hands
« Reply #7 on: June 17, 2010, 05:29:51 pm »
Rimu welcome we Kiwi's gotta stick together, cause we are few.LOL

Any way to the idea "great" to expenses for me I get a 3mm mdf piece and attach that to the table in winter not as warm as your $80 warmer.

Merlin
Logged
Try not! Do,
or do not
There is no try

Yoda "Empire Strikes Back" 1980

Dragonlord85

  • Guest
Re: Cold Hands
« Reply #8 on: June 17, 2010, 07:12:17 pm »
Do you need a napkin Janet?
Logged

northie66

  • Guest
Re: Cold Hands
« Reply #9 on: June 17, 2010, 08:20:04 pm »
I need something... that's for sure  ;) ;D
Logged

Offline GrayBeard

  • *****
  • Hero Member
  • Posts: 7088
  • My DW 788 sends you HUGZZZZ from Missouri, USA!
    • View Profile
Re: Cold Hands
« Reply #10 on: June 17, 2010, 08:29:24 pm »
I have a bib here my grandkids used to use!
Want me to send it your way, Janet?!?!?!?!?
Logged
I never really wanted to grow up....All I wanted was to be able to reach the cookie jar...and play with my DW 788

northie66

  • Guest
Re: Cold Hands
« Reply #11 on: June 17, 2010, 09:43:28 pm »
Gonna need more than a bib... maybe some quicker picker upper ;)

Jeez... poor guy... all new and I'm probably scaring him off  :-\
Logged

jon

  • Guest
Re: Cold Hands
« Reply #12 on: June 17, 2010, 10:25:14 pm »
thats a cool idea
Logged

Charlie Dearing

  • Guest
Re: Cold Hands
« Reply #13 on: June 18, 2010, 01:18:21 am »
Not sure it's a bib she's needing, but I'll get slapped if I go into more detail.
Logged

Offline Danny

  • *****
  • Hero Member
  • Posts: 1674
    • View Profile
Re: Cold Hands
« Reply #14 on: June 19, 2010, 09:38:10 am »
I bought a small space heater with a fan.  I set it up on my workbench about  two feet from my saw and it works great in the cold temps.  :+}
Logged
Danny  :+}
Pages: [1] 2   Go Up
« previous next »
 

SMF

Teknoromi

SMF Links

  1. XHTML
  2. RSS
  3. WAP2
  4. Theme by snrj