Author Topic: Finishing  (Read 1562 times)

Shogun

  • Guest
Finishing
« on: January 19, 2013, 11:23:32 am »
I just spent the morning going thru Steves archives looking for these little yellow triangles to set your work on while you apply a spray finish. I know I've seen them someplace and I would like to order some. Can any one help?

Offline GrayBeard

  • *****
  • Hero Member
  • Posts: 7088
  • My DW 788 sends you HUGZZZZ from Missouri, USA!
    • View Profile
Re: Finishing
« Reply #1 on: January 19, 2013, 11:28:47 am »
They are called 'painters' points' and are available from Rockler, Woodcraft, and many other stores.

~~~GB~~~
I never really wanted to grow up....All I wanted was to be able to reach the cookie jar...and play with my DW 788

Offline dgman

  • *****
  • Hero Member
  • Posts: 6916
    • View Profile
Re: Finishing
« Reply #2 on: January 19, 2013, 12:36:31 pm »
Yup, I have two sets and use them a lot. They came from Woodcraft.
Dan In Southern California

Shogun

  • Guest
Re: Finishing
« Reply #3 on: January 19, 2013, 12:55:19 pm »
Thanks guys...going there now. lol

Dean A

  • Guest
Re: Finishing
« Reply #4 on: January 19, 2013, 02:23:20 pm »
steve has patterns for these in his catalog. You can make your own

http://www.stevedgood.com/triangles.pdf

Coullion

  • Guest
Re: Finishing
« Reply #5 on: January 19, 2013, 10:57:27 pm »
I have made a bunch of Steve's triangle stands and use them all the time for painting and finishing projects. You can make them as large or small as you need.

Becky

  • Guest
Re: Finishing
« Reply #6 on: January 20, 2013, 11:32:25 pm »
Some hobby stores have them too.  I keep planning to make some of them in a smaller size for smaller pieces but never did get around to it.

A tip from one of the magazines that I have found very helpful is to get some of that plastic carpet runner.  Get the kind with lots and lots of spikes on the back.  I found it at Home Depot.  The ones at Lowes all had spikes about an inch apart which was too far apart.  Lay it backside up and you have lots of tiny little plastic points for keeping small pieces up from the surface.  

I still use the yellow ones for larger pieces but I really like this trick for the little ones.

Spartan scroller

  • Guest
Re: Finishing
« Reply #7 on: January 21, 2013, 09:28:03 am »
Steve Good has a pattern somewhere that you can use to make little traingles out fo scrap 1/8th inch baltic birch.  I mades some and they work great for me.

Regards,
Terry
terrysscrollshoppe.com

Offline Rapid Roger

  • *****
  • Hero Member
  • Posts: 1468
  • Hutchinson, Kansas
    • View Profile
Re: Finishing
« Reply #8 on: January 21, 2013, 09:36:09 am »
I made my "painters points" out of some round discs leftover from using a hole saw and 1/4" dowel about 2" long. Obviously, the larger the disc, the more stable they will be and the 1/4" hole is already there and dead center. I sharpened the dowel with a pencil sharpener before I cut them to length. There again, you can make them as tall or short as you want to as  long as they are all the same heights.
They work just fine for larger projects and I use them all the time.

Rog
An ounce of responsablity is worth 10 pounds of state and fedral laws.

Offline dunk

  • *****
  • Hero Member
  • Posts: 1625
  • Staying positive.
    • View Profile
    • Mike's Wood-n-Things
Re: Finishing
« Reply #9 on: January 21, 2013, 01:30:47 pm »
I have a bunch that I got for free.  Everytime I get a pizza in a box they have these 4 legged things to keep the pizza from getting stuck to the lid.  i save em up and they make great painters points.
Mike

Junk is something you've kept for years and throw away three weeks before you need it.

 

SMF

Teknoromi