Scrollsaw Workshop Community -Please register to enable posting.

General Category => Brag Forum => Topic started by: Keefie on March 17, 2012, 12:18:42 pm

Title: 3 days work on my new saw.
Post by: Keefie on March 17, 2012, 12:18:42 pm
Well it looks like Axminster came through, I'm now on my 6th saw and it's working perfectly. They never managed to sort out the EX16, either too much vibration or way too much North/South and East/West blade movement. They upgraded me to an EX21 free of charge. It was too long to fit my workbench where the 16 used to be, so I have utilised an old bandsaw stand untill the correct tables come in stock. I still have a slight north/south blade movement but only approx 1mm , it not causing any problems with the cutting except on really tight turns when it makes the wood shake a little.I have now cut 7 items on it and there isnt a mark on the table surface, the old saws were getting scratched to hell as I had to hold down the wood so hard to stop it jumping around all over the place where the blade was out of alignment. I have attatched picture of a few bits made on the new saw over the last three days.
Title: Re: 3 days work on my new saw.
Post by: malc on March 17, 2012, 01:04:42 pm
Nice work! Glad the new saw is OK.
Malc
Title: Re: 3 days work on my new saw.
Post by: DWSudekum on March 17, 2012, 02:35:18 pm
Glad you finally got something that worked out.  Those projects look great.  Thanks for sharing them with us.



DW
Title: Re: 3 days work on my new saw.
Post by: dgman on March 17, 2012, 02:58:03 pm
Very nice cuttings there Keffie! I'm glad you got it sorted out. Now that you have a good working saw, how do you like it?
Title: Re: 3 days work on my new saw.
Post by: newfie on March 17, 2012, 03:33:34 pm
nice work glad the new saw is working out for you.
Title: Re: 3 days work on my new saw.
Post by: Intarsia92 on March 17, 2012, 04:55:29 pm
Glad the EX21 is working out for you, nice upgrade.
Title: Re: 3 days work on my new saw.
Post by: Keefie on March 17, 2012, 05:25:01 pm
Hi DG, saw is great, a pleasure to cut with. I can only sit at the saw for short periods, about 20 minutes, then I have to get up and walk round for a bit because of my knee locking up, but even with that limitation I have managed to cut and finish 7 items in 3 days. I couldn't have done that on the other ones. All I can say is Thank You Axminster for not giving up, and getting it sorted for me. Their customer service is excellent.
Title: Re: 3 days work on my new saw.
Post by: Russ C on March 17, 2012, 06:11:14 pm
They look great Keffie, nice work. Thanks for sharing with us.  :)
Title: Re: 3 days work on my new saw.
Post by: Al W on March 17, 2012, 08:03:30 pm
Nice looking work.  I personally like the ship, might have to try that one some time.

Thanks for sharing.
Title: Re: 3 days work on my new saw.
Post by: mrsn on March 17, 2012, 11:34:58 pm
nice job on these. I am glad you got your saw situation worked out. It is nice to hear that there are a few places left that have good customer service.
Title: Re: 3 days work on my new saw.
Post by: SheGold on March 18, 2012, 03:19:08 am
Very well done Keefie... Glad you got the saw straightened out.. Now all thats left is saw dust... Sheila
Title: Re: 3 days work on my new saw.
Post by: Marshall on March 18, 2012, 03:34:28 am
Good work , cannot give credit to the saw only - the person behind it does make the difference also .......MB
Title: Re: 3 days work on my new saw.
Post by: woodworker on March 18, 2012, 07:57:38 am
good to see you got it sorted out after going thru all these saw's.you have done a very nice job on the pattern's too. can i ask you ,did you use pattern's of the dog's head's,and insert them into the frames yourself,or find the pattern's already done,if so,where could i get some.thankyou for any help-----dave
Title: Re: 3 days work on my new saw.
Post by: Keefie on March 18, 2012, 08:02:21 am
Dave, I saw them for sale at a craft fair, the bloke said he designed them himself when I asked where to buy a pattern. I asked him if he minded me taking a picture and trying to use it as a pattern, so thats what I did. They were all cut from a printed photo.
Title: Re: 3 days work on my new saw.
Post by: Tomsunnu on March 18, 2012, 08:29:49 am
Very nice work! I am glad you got a very good customer service :) in my case i am still awaiting for a part from proxxon ,saw out of commission since jan :(. Hopefully it should be sorted out soon. Thanks for sharing.
Title: Re: 3 days work on my new saw.
Post by: woodworker on March 18, 2012, 08:54:25 am
thanks for quick reply,do you mind if i make a pattern from the jack russel clock,thanx ----dave
Title: Re: 3 days work on my new saw.
Post by: cdrover(Clyde) on March 18, 2012, 09:27:47 am
It is hard to keep a good woman down, enjoy your new saw. ;D
Title: Re: 3 days work on my new saw.
Post by: BRE1205 on March 18, 2012, 10:05:04 am
Glad the saw issues are getting worked out.  Wow, you work is awesome.  I like those clocks, too !  I have GOT to make some of those !  Too many patterns......so little time.. hahaha
Take care and thansk for sharing.
BRE
Title: Re: 3 days work on my new saw.
Post by: frankorona on March 18, 2012, 01:27:22 pm
Beautiful watches and boat, looks great
Title: Re: 3 days work on my new saw.
Post by: wombatie on March 19, 2012, 01:23:41 am
Congratulations on your new, new, new, new, new, new saw Keefie.   Glad they worked it out for you in the end.  Great work too.

Marg
Title: Re: 3 days work on my new saw.
Post by: Marcellarius on March 19, 2012, 04:23:43 am
nice to hear your new saw is working well.
nice job
Title: Re: 3 days work on my new saw.
Post by: BigPete on March 19, 2012, 04:37:45 am
Nice work keith , I Like them ! Congrats on new saw ...Pete
Title: Re: 3 days work on my new saw.
Post by: Keefie on March 19, 2012, 05:11:28 am
Dave, if you can make one from the pictures you welcome to make it. please post pic after , I like to see others work.

CDRover, is there something you know that I don't??  last time I checked I was male lol.
thanks everyone for all your nice comments.