Scrollsaw Workshop Community -Please register to enable posting.

General Category => Brag Forum => Topic started by: wardch on March 27, 2011, 10:58:38 pm

Title: Silverton Colorado
Post by: wardch on March 27, 2011, 10:58:38 pm

Pattern by Jeff Zaffino,  1/8 Oak Ply,  Used 2/0 spiral blade. 
Still needs a frame and finish. 

Went up to Silverton a couple of weeks ago and that guy was still sitting there. 


Thanks for looking.

Chris

Title: Re: Silverton Colorado
Post by: CNLNC on March 27, 2011, 11:06:27 pm

Awesome job, Chris! Great job on the cutting. I'm still trying to figure out my first portrait, hopefully it can turn out as nice as yours.
Thanks for sharing.

Title: Re: Silverton Colorado
Post by: dgman on March 27, 2011, 11:41:48 pm

That is beautiful Chris! Wonderful work!

Title: Re: Silverton Colorado
Post by: DWSudekum on March 28, 2011, 01:22:06 am

Very nice cutting Chris.  Thanks for sharing it with us. 

DW

Title: Re: Silverton Colorado
Post by: sbudinger on March 28, 2011, 01:58:12 am

Very nice I really like this.

Title: Re: Silverton Colorado
Post by: newfie on March 28, 2011, 08:15:07 am

very nice Chris thanks for sharing

Title: Re: Silverton Colorado
Post by: julief on March 28, 2011, 08:24:42 am

Nice cutting, Chris!

Title: Re: Silverton Colorado
Post by: frankorona on March 28, 2011, 09:44:19 am

There are no words to describe the patience and talent shown.
Congratulations

Title: Re: Silverton Colorado
Post by: Marcellarius on March 28, 2011, 10:15:42 am

very nice

Title: Re: Silverton Colorado
Post by: Russ C on March 28, 2011, 11:12:05 am

Looks awesome, Thanks for posting.  :)

Title: Re: Silverton Colorado
Post by: Intarsia92 on March 28, 2011, 11:16:22 am

Great job cutting, Looks like someplace I'd like to be right now!

Title: Re: Silverton Colorado
Post by: bluesuede on March 28, 2011, 11:51:15 am

lookin' good, thanks for sharing
Bruce ;D

Title: Re: Silverton Colorado
Post by: GrayBeard on March 28, 2011, 06:11:44 pm

Time to start hintin' for my Daughter to invite me out to them thar Mountains!

Very Fine piece of work!

~~~GB~~~

Title: Re: Silverton Colorado
Post by: Rogh48 on March 28, 2011, 06:54:55 pm

Very nice Chris.  Colorado is one of my favorite places to go so I really like this.  Roger  :)

Title: Re: Silverton Colorado
Post by: wardch on March 28, 2011, 06:58:55 pm

Thank you for all the comments.  Much appreciated.   
I got this information on another forum.   

"Be careful with Jeff?s designs. He was found guilty of copyright laws for taking other artist images and selling them to magazine?s without permission."

So does this mean the 3 patterns I bought 2 years ago I can't use?   

Title: Re: Silverton Colorado
Post by: cameronj on March 28, 2011, 09:07:28 pm

Very nice work, Chris.  It looks like you enjoy cutting fine detail like I do.
Jim

Title: Re: Silverton Colorado
Post by: scrollsaw22 on March 28, 2011, 11:30:56 pm

Very good Chris and it looks good without finish, will look even better framed up.  Thanks for sharing your talent!

Title: Re: Silverton Colorado
Post by: Mainewoods on March 29, 2011, 08:34:38 am

Excellent job!

Title: Re: Silverton Colorado
Post by: Al W on February 25, 2012, 09:19:04 am

Very nice cutting.  I have a Silverton t-shirt, does that count?

Title: Re: Silverton Colorado
Post by: daliclimbs on February 25, 2012, 09:29:26 am

Nice! Came out great!

Title: Re: Silverton Colorado
Post by: Tomsunnu on February 25, 2012, 09:36:22 am

Very nicely done! Looks great! :)

Title: Re: Silverton Colorado
Post by: Keefie on February 25, 2012, 11:49:28 am

There is only one word for that - AWESOME .  nicely cut.

Title: Re: Silverton Colorado
Post by: Dan26 on February 25, 2012, 12:23:37 pm

Great job!! I sure miss Colorado.

Title: Re: Silverton Colorado
Post by: DWSudekum on February 25, 2012, 01:18:01 pm

Nicely done.  Thanks for sharing it with us.


DW

Title: Re: Silverton Colorado
Post by: malc on February 25, 2012, 02:19:30 pm

Well done Chris, spiral blades are not the easiest.
Malc

Title: Re: Silverton Colorado
Post by: Marshall on February 25, 2012, 11:01:05 pm

Would be pretty on any wall ........fine work ..................MB

Title: Re: Silverton Colorado
Post by: RFortier on February 26, 2012, 02:56:25 pm

That's a beautiful job of cutting. I've always loved that pattern by JZ.

Ray F

Title: Re: Silverton Colorado
Post by: boxmaker on February 26, 2012, 04:49:00 pm

Wow, that came out nice.

Title: Re: Silverton Colorado
Post by: wombatie on February 27, 2012, 12:35:24 am

Thats great you did a marvelous job. I love these type of patterns.  I have a few of Jeffs patterns and I love them.

Marg

Title: Re: Silverton Colorado
Post by: heiko rettberg on February 27, 2012, 01:21:12 am

Looks greate, wonderful job you did.