Scrollsaw Workshop Community -Please register to enable posting.

General Category => Pattern Requests. => Topic started by: grampa on February 17, 2011, 09:24:20 am

Title: You are my everthing
Post by: grampa on February 17, 2011, 09:24:20 am

Hope its of use.........Paul ;D

Title: Re: You are my everthing
Post by: Chachi on February 17, 2011, 09:34:20 am

Once again Paul You have done it Amazing job thanks for the share I got my copy, You are the man <insert clapping smiley here>

Title: Re: You are my everthing
Post by: newfie on February 17, 2011, 10:04:39 am

Great pattern once again Paul,got my copy.
thanks Todd

Title: Re: You are my everthing
Post by: cameronj on February 17, 2011, 11:01:16 am

Thanks Paul.  My daughter and son-in-law will love it for our grandson.
Jim

Title: Re: You are my everthing
Post by: Bill P on February 17, 2011, 11:02:21 am

Wow.

Bill

Title: Re: You are my everthing
Post by: Russ C on February 17, 2011, 11:46:31 am

Thanks for sharing the pattern. Nice job.  :)

Title: Re: You are my everthing
Post by: pauley555 on February 17, 2011, 02:10:18 pm

outstanding,thanks again paul

Title: Re: You are my everthing
Post by: pokey on February 17, 2011, 02:40:47 pm

Paul,

You are amazing with a fantastic talent. 

pokey

Title: Re: You are my everthing
Post by: Dawie on February 17, 2011, 03:58:54 pm

Thanks a lot Paul. Couple of babies due this end, so I might just make this for one of them parents.
David

Title: Re: You are my everthing
Post by: Dobbo on February 17, 2011, 05:27:08 pm

This one is Super.Just Great Neighbour across road
has just had a baby Boy.

Title: Re: You are my everthing
Post by: mrsn on February 18, 2011, 04:17:53 pm

I just love this pattern!

Title: Re: You are my everthing
Post by: blue11811 on February 18, 2011, 04:25:31 pm

Hi Paul,
Newbe here you make nice patterns and great ideas.

Thanks

Title: Re: You are my everthing
Post by: wha on June 12, 2011, 03:07:00 pm

Thanks for the great pattern. My wife has a baby shower to go to this week.
I cut this out of 1/2" maple and used up a lot of blades. The blades I used were
18tpi double tooth and 16tpi double tooth. Could this have been cut with different blade numbers. Thanks.

Title: Re: You are my everthing
Post by: dgman on June 12, 2011, 03:41:16 pm

Hey Wha, welcome to the forum! Most folks would of done that pattern in 1/8" or 1/4" Baltic birch plywood, However 1/2" maple is doable. I would use a Flying Dutchman UR 3 or 5, or an Olsen #2R or 5R skip tooth blade. I don't know what sizes you used, but the ones I recommended above would work nicely.
Feel free to post a picture of the completed project!

Title: Re: You are my everthing
Post by: wha on June 12, 2011, 08:42:58 pm

Thanks dgman next time I'll try it at 1/4". I did it at 1/2" because the wood I get is about 1" rough and to plane it to 1/4" I feel like I'm throwing half the board away. I'll have to get some of those blades at that size and try it.
The blades I used were Pegas blades Doubletooth #4 .012x.040x16TPI
and Pegas blades Doubletooth #2 .010x.033x18TPI .
Here is the finished project.


    

Title: Re: You are my everthing
Post by: dgman on June 12, 2011, 10:18:49 pm

Wow Wha, That came out gorgeous! I defiantly like it in Maple!
You need to go to the introduction page and introduce yourself to the rest of the forum.

Title: Re: You are my everthing
Post by: kimb on June 12, 2011, 10:32:33 pm

That really looks good on the maple. Great job on the cutting too, especially the letters. Great pattern too.

Kim

Title: Re: You are my everthing
Post by: sbudinger on June 12, 2011, 11:13:50 pm

Great pattern Paul thanks for sharing. And a great cut wha that really came out nice.

Title: Re: You are my everthing
Post by: Gabby on June 13, 2011, 04:59:54 am

Looks really good.
Just a note though, when I clicked on the photo it directed me to the site where you have it posted. A nasty popup website with nude videos opened too without any notice. You might want to find some place else to host your pictures especially if you have young kids viewing your work.
Gabby

Title: Re: You are my everthing
Post by: wha on June 13, 2011, 11:43:03 am

Thanks Gabby I put it as an attachment. Why that happened I don't know it
was uploaded as family safe.

Title: Re: You are my everthing
Post by: shrimpmojo on June 15, 2011, 12:03:14 am

Nice pattern Pappa, I love the font, where can i find this font???

Shrimpmojo

Title: Re: You are my everthing
Post by: Gabby on June 15, 2011, 10:18:15 pm

Quote from: wha on June 13, 2011, 11:43:03 am

Thanks Gabby I put it as an attachment. Why that happened I don't know it
was uploaded as family safe.

I guess you fixed it now when I clicked the image it just opened a larger one. It didn't take me to another website.
Gabby