Scrollsaw Workshop Community -Please register to enable posting.

General Category => General Scroll Saw Talk => Topic started by: GrayBeard on January 20, 2011, 04:11:15 pm

Title: Holy Crap!
Post by: GrayBeard on January 20, 2011, 04:11:15 pm

I gotta get on the saw!!!

I just found 2 EMPTY 8 x 10 frames I thought I had already used!!!!!

~~GB~~~

Title: Re: Holy Crap!
Post by: Russ C on January 20, 2011, 04:37:40 pm

LOL, to much posting and not enough work.  :D

Title: Re: Holy Crap!
Post by: tux_linux on January 20, 2011, 04:42:51 pm

STOP!

Are those frames empty - or do they just have hugh cutouts?  ;D :o

regards
Torsten

Title: Re: Holy Crap!
Post by: marmoh on January 20, 2011, 05:00:16 pm

Yeah GB...a little less talk and a lot more action needed !!!!!!

Title: Re: Holy Crap!
Post by: GrayBeard on January 20, 2011, 05:03:53 pm

IF your saw table were as cold as mine you would be on the computer also!

Last check when I went out for the mail it was 39? in the garage and even my propane heater can't warm that up to 'comfortable'!

~~~GB~~~

Title: Re: Holy Crap!
Post by: Chachi on January 20, 2011, 06:05:35 pm

Lol GB Mine said 23* so I know all about that table on the saw being cold so I here I sit.....

Title: Re: Holy Crap!
Post by: mrsn on January 20, 2011, 06:09:02 pm

oh come on GB, it is -2 at my house.

Title: Re: Holy Crap!
Post by: jimbo on January 20, 2011, 06:12:13 pm

Yeh well my work shop is 20c Celsius that is, had you all fooled eh
Jimbo

Title: Re: Holy Crap!
Post by: Bill P on January 20, 2011, 06:42:17 pm

It's 60 at my place!

Bill

Title: Re: Holy Crap!
Post by: bettyswood on January 20, 2011, 06:59:00 pm

Sorry guys, here in Tucson it is 74 degrees.  I won't tell you about the summer tho!

Title: Re: Holy Crap!
Post by: Judy Hunter on January 20, 2011, 10:29:54 pm

My temp is at about -10 degrees that is BELOW with a wind chill that isn't fit to talk about. 
I am so glad I moved inside.  It was nice and warm in the other shop too but really cold getting there.

Title: Re: Holy Crap!
Post by: Sawdust Dave on January 20, 2011, 10:36:51 pm

And I'm always complaining that my basement shop is 50 in the winter... I guess I should be thankful lol

Title: Re: Holy Crap!
Post by: yyyyyguy on January 20, 2011, 10:55:42 pm

not trying to out do any one but -6 and wind chill of -25 I'll have to do a lot of cutting to pay the fuel oil bill this year :'( :'( :'(

Title: Re: Holy Crap!
Post by: malc on January 21, 2011, 05:45:50 am

Look on the bright side. If the world temperature was say, a constant 20 degrees celsius. we would loose 90 percent of our casual conversation.
Malc :) :)

Title: Re: Holy Crap!
Post by: emtdonald on January 21, 2011, 07:23:29 pm

 santa  was  nice  and  brought  me  a  little heater. i just  cant use the bigger saws at the same time.  i turn it on while wating on my coffee. still have  to keep  the spray  adhesive inside. 

Title: Re: Holy Crap!
Post by: Russ C on January 21, 2011, 08:01:33 pm

I love Florida, a little wet this morning, in the 60'S tomorrow clear skies lots of sun.  :)

Title: Re: Holy Crap!
Post by: boxmaker on January 21, 2011, 09:39:49 pm

Well... I was going to go in the shop this weekend, but our weatherman says it will be 3 F Saturday and -20 to -25 below Saturday night, and Sunday it will warm up to +1 and -25 to -30 at night. I think I will just stay inside.

Title: Re: Holy Crap!
Post by: tux_linux on January 22, 2011, 12:33:05 pm

What's that noise - is it little girls whining? ;D

You can use an electrical radiator if needed.

regards
Torsten

Title: Re: Holy Crap!
Post by: Russ C on January 23, 2011, 08:41:46 am

I prefer a propane heater, keeps my shop nice and warm.  :)

Title: Re: Holy Crap!
Post by: Muzzlemike on January 27, 2011, 10:09:58 pm

I moved my shop to my basement . It is warm in the winter and coll in the summer and there is always a nice covering of saw dust . My little Man Cave . Now to get my motorcycle down those steps . The world would be fine .

Mike