Scrollsaw Workshop Community -Please register to enable posting.
General Category => General Scroll Saw Talk => Topic started by: northie66 on October 08, 2010, 05:46:49 pm
-
from my scroll saw buddy at work. He said it's old, huge, and very heavy.
I'm not sure if I want to get into that or not. Are they dangerous? I don't need more hand surgery!
-
I've had several friends who do lathe work (Lefty, John "the Claw", Stubs) and none of them ever had a problem. They seem to be as safe as any tool, as long as you follow the basics (pin your hair back, safety glasses, don't grab the wood, etc.). I'd pop over to his house and give it a try first.
Good luck.
Bill
P.S. Those names were my attempt at a joke, if no one got that.
-
Any tool Janet is dangerous if not properly used. If it is a large lathe it would normally be used for longer items (i.e. table legs). I would think most scrollers would be more apt to purchase a smaller lathe (i.e. for pens).
Before you use it (if you get it) become knowledgeable about it before turning on!
Karl
-
They seem to be as safe as any tool, as long as you follow the basics (pin your hair back, safety glasses, don't grab the wood, etc.).
Also, NO Jewelry, No Loose fitting Clothing, Roll sleeves above the elbow or be sure they are buttoned.
I've seen what can happen when a wedding ring gets hung up on a rapidly turning shaft and it is not pretty!
~~~GB~~~
-
I agree with what everyone has said. Basic tool safety. Trying it out at his house is a good idea also. 8)
-
Find a local woodturning association. They usually have someone on hand that is certified to give a basic course. I recommend that you go and take a class from an expert before turning it on.
Diane
-
Janet I recommend you have several classes, as already said all machines are dangerous if miss handled, the biggest problem with lathe work is the mess they make wood shavings and dust, and there is plenty of that, have a look at the pics in the brag I posted
Jimbo
-
Jimbo I was hoping you would post on this thread, and maybe could explain better what I am going to try to say, I had a friend who had an old lathe given to him, the lathe was so old you had to wax the spindle or something for it to turn so it would not get friction when it turned or it would bind, Like I said I do not know much about lathes, but I just hate to see you get something unusable. I am hoping Jimbo can elaborate on what I am trying to say. I do know this old lathe was no fun to use.
Mark
-
Hey Janet, The lathe my be free, but that is just the beginning! You will need chisels, chuck, and so much more. Even if you spent $500 on a lathe, the tools and accessories will double or triple that!
-
I think he said he had all that stuff dgman. But I've decided I'm not going to take it. I don't have the room and I don't want the mess.
-
Hi Janet,
You made the right decision.
FD Mike
-
Smart Girl...maybe later and smaller!
~~~GB~~~
-
Yeh a mini lathe if you are interested they are good for small projects and are easy to move around.
As to your question Mark that would be the live center you are talking about they are easy to replace with one with bearings in it
Jimbo
-
No one mentioned sharpening the tools. It is on-going, and one needs to be good at sharpening. I am not. Enjoyed making bowls, but finally sold everything. Will stick with scrolling. Think sharpening is an art.
Pat B
-
Pat they have sharpening jigs and most of the pros. use them now, it is the only way to sharpen specialized chisels it gives the same grind time after time and saves wearing the chisel down to quickly
Jimbo
-
Pat they have sharpening jigs and most of the pros. use them now, it is the only way to sharpen specialized chisels it gives the same grind time after time and saves wearing the chisel down to quickly
Jimbo
All those extras cost MONEY too. If you are mechanically challenged, I would recommend not to take it on.
One thing not mentioned. If the piece of wood isn't centered properly and the tool grabs, the wood will fly out in just about any direction. Stay away from cheap lathes such as Harbor Freight sells, many times you need to turn at a slow speed and they do not go slow enough, and are flimsy affairs at best. I learned this the hard way and nearly lost an eye, from a chunk about the size of a loaf of bread. I scrapped the HF lathe and got a nice Jet, no comparison.
Any tool that spins or any other action can be dangerous especially to users that aren't trained how to use, or NOT to use it properly.
Check your fingers and toes.
Gabby