Scrollsaw Workshop Community -Please register to enable posting.
General Category => The Coffee Shop => Topic started by: newfie on September 05, 2010, 10:42:51 am
-
hi everyone i saw a product in a craft magazine for spray on velvet it's used for lining jewelry & trinket box's etc. as anyone used this product or know where to get it?
Todd
-
I believe what you are referring to is 'Spray on Flocking' and I seem to remember seeing it in one of the Craft Stores but can't remember which one.
~~~GrayBeard~~~
-
I was going to try that and was advised not to. You spray (or apply) glue to the surface and then sprinkle the flocking on it and HOPE FOR THE BEST (good coverage) because you CAN NOT re-do-it ! :o
I was trying to line a small box with felt, velvet, or satin for a "home comunion" box for the church.
I ended up at Hobby Lobby and found some self adhearing felt that is sold in sheets almost like paper. It comes in ALOT of different colors too! I was able to cut pieces to shape with sissors and trial fit before removing the backing and applying to the surface. WARNING be careful because once applyed, it
WONT come off with out ALOT of work!!! DAMHIKT ;D
Actually it is not as hard as I might make it sound but, it does work and is easier and less messy than the spray flocking. It also holds up well with use, the comunion box is a year old or more and is used often and still looks nice.
Rog
-
To get good results from flocking the flock material has to be appled with and air brush for the fibres to stand up and be fuzzy.
-
For lining the bottom of my trinket box's I glue velvet or felt to card and place it in the base of the box, cut the card to shape first for a good fit, I don't bother gluing the card to the bottom of the box as some don't like it and it makes for easy removal
Jimbo
-
I use the flocking inside some of my small trinket boxes. Thanks Judy you may have answered why the fibers never seem to look thick enough. The airbrush you refer to is that the cardboard tube that you get with the kit or do you use a real air brush like for paint. The way I do mine is, I apply the glue to the box bottom, then add a teaspoon or so of fibers and cover with a piece of cardboard and give it a few good shakes then let dry and remove the extra fibers in the morning. I just thought it was normal for it to be a little thin, I figured that is why the glue is colored the same as the fibers. I like Jimbos idea with the card stock, and I like that Jimbo does not glue it in either, It's hard to decide which color someone might like, this way if they want something different you can pull it out and change it.
Mark
-
thanks for the info guys appreciate it.
-
I have used the flocking from www.donjer.com/ on several different projects. You paint on the adhesive (I use an acid brush) then "spray" the flocking in with a cardboard tube sprayer like the old pest control dusters, and leave it to dry overnight. Turn it over and tap out the excess (save it for the next project) and you are done. Looks great and easy to use. I just buy it at the local Woodcraft store. I've been very happy with it. Especially for band saw boxes.
-
that's a great idea to put inside.
isn't this flocking stuff the same as they us on mini railroad boards to make Grass and mountains?
-
I think the cardboard applicator might work just fine. I have onkly used a regular air brush. But it isn't easy.
-
Suede Tex by DonJer is what I use. Buy the kit and it comes with the glue, flocking, cardboard tube applicator and a small brush. It turns out great and I have really liked the results. The only problems I have with it is that I am not patient enough to let it dry and I start to "tinker" with it...if you leave it alone to cure, it turns out really nice. Not cheap...but worth the money for me.
I use to use the sticky backed felt sheets, but this works much better.
-
I lined this piece with real velvet and made it double sided so it shows through the fretwork and makes the lining too.
-
nice box Julie
-
Beautiful box, Judy. I thought about doing that but have never tried.