Scrollsaw Workshop Community -Please register to enable posting.

General Category => Brag Forum => Topic started by: EIEIO on May 18, 2014, 04:28:07 pm

Title: Curvy Spoon
Post by: EIEIO on May 18, 2014, 04:28:07 pm

Here's another wooden spoon, this one with some curves in the shape. 10" long, 2" wide bowl.

(https://lh3.googleusercontent.com/-WiKrIEWMYyc/U3kVSwkPQuI/AAAAAAAABfg/43M80O-Tz8g/w1597-h507-no/Spoon2+top.jpg)

(https://lh6.googleusercontent.com/-xSzbcBtuNCI/U3kVT-P9_3I/AAAAAAAABfo/vh1DJrd6iNQ/w1598-h383-no/Spoon2+bottom.jpg)

The body and bowl are cut from Walnut. The bottom of the bowl is a glued-on piece of 1/8" BB Ply to get some color contrast.

The compound cutting pattern is attached. It's meant for a 1" blank but you can use 3/4" if that's what you've got. You could soften the inside angle where the handle meets the bowl - this one is sharp and hard to sand and get oil into. Finished in Feed N Wax.

Title: Re: Curvy Spoon
Post by: Merlin on May 18, 2014, 05:46:19 pm

Thanks Ray when the weather warms a bit will give it a go.

***Merlin***

Title: Re: Curvy Spoon
Post by: DWSudekum on May 18, 2014, 06:33:31 pm

Nicely done spoon.  Thanks for sharing this with us.

DW

Title: Re: Curvy Spoon
Post by: newfie on May 18, 2014, 08:38:06 pm

great job

Title: Re: Curvy Spoon
Post by: Marcellarius on May 19, 2014, 09:32:33 am

Nice job, love the walnut look, really nice job

Title: Re: Curvy Spoon
Post by: Keefie on May 19, 2014, 11:08:16 am

Great job there Ray, thanks for sharing the pattern with us.

Title: Re: Curvy Spoon
Post by: wombatie on May 20, 2014, 03:00:56 am

That looks niffty Ray.  A great project.

Marg

Title: Re: Curvy Spoon
Post by: frankorona on May 20, 2014, 07:55:42 am

Great work, looks very well done, thanks for sharing.

Title: Re: Curvy Spoon
Post by: troy_curtis on May 21, 2014, 02:00:19 am

Nice....like the shape and like the color of the wood.