Scrollsaw Workshop Community -Please register to enable posting.

General Category => Brag Forum => Topic started by: countryscroller on February 09, 2014, 05:55:52 am

Title: Elephant
Post by: countryscroller on February 09, 2014, 05:55:52 am

Finally a new video! https://www.youtube.com/watch?v=Zr9vXgnNwl4&feature=c4-overview&list=UULAxz24dFceU8bIyUf_SQDw (https://www.youtube.com/watch?v=Zr9vXgnNwl4&feature=c4-overview&list=UULAxz24dFceU8bIyUf_SQDw)   Getting back into the swing of things despite the continuous cold. This was an order I had. Thanks to Dave (Daveo) on here for the pattern, as well as the others that took the time to make one.

Title: Re: Elephant
Post by: daveo on February 09, 2014, 06:30:28 am

DUSTIN
Nicely cut and a great video to boot.
Dave

Title: Re: Elephant
Post by: Marcellarius on February 09, 2014, 07:30:51 am

nice elephant!  looks great. also again a nice video to watch.

Title: Re: Elephant
Post by: frankorona on February 09, 2014, 09:07:28 am

Wonderful work, looks great, thanks for sharing.

Title: Re: Elephant
Post by: DWSudekum on February 09, 2014, 11:29:47 am

Very nicely done Dustin.  Thanks for sharing this with us.

DW

Title: Re: Elephant
Post by: overfifty on February 09, 2014, 12:00:28 pm

Nicely done Dustin. Please allow me to ask - why the clearcoat? Is this something everyone does? I've stained pieces to enhance the grain, but don't typically otherwise finish pieces. I can see protecting them if their destined for the outdoors. Thank you, Barry.

Title: Re: Elephant
Post by: countryscroller on February 09, 2014, 01:50:57 pm

Thanks all 

Quote from: overfifty on February 09, 2014, 12:00:28 pm

Nicely done Dustin. Please allow me to ask - why the clearcoat? Is this something everyone does? I've stained pieces to enhance the grain, but don't typically otherwise finish pieces. I can see protecting them if their destined for the outdoors. Thank you, Barry.

  I just use the clear coat to bring out the grain, not really provide any protection. It is quick and easy for me.

Title: Re: Elephant
Post by: jrpeteo on February 09, 2014, 03:38:18 pm

Nice job Dustin, On the elephant and the video.
Pete

Title: Re: Elephant
Post by: Keefie on February 09, 2014, 04:45:22 pm

great job there Dustin, good video too

Title: Re: Elephant
Post by: wombatie on February 10, 2014, 12:29:35 am

That looks great Dustin.  Well done.

Marg

Title: Re: Elephant
Post by: heiko rettberg on February 10, 2014, 01:32:59 am

Looks very nice and a good video to.

Title: Re: Elephant
Post by: EIEIO on February 10, 2014, 08:57:26 am

Nice work Justin. That came out great. Even after a winter layoff, you are still a fast and accurate cutter.

Title: Re: Elephant
Post by: countryscroller on February 10, 2014, 10:43:43 am

Thanks all,      Dustin

Title: Re: Elephant
Post by: Malistar22 on February 11, 2014, 03:13:40 pm

I agree with all the others. Very good job. Do you really scroll that fast or was the video sped up? Because I was awed by that speed of cutting.  ;)

Title: Re: Elephant
Post by: newfie on February 11, 2014, 03:36:52 pm

nice work Dustin thanks for sharing

Title: Re: Elephant
Post by: countryscroller on February 11, 2014, 03:45:54 pm

Quote from: Malistar22 on February 11, 2014, 03:13:40 pm

I agree with all the others. Very good job. Do you really scroll that fast or was the video sped up? Because I was awed by that speed of cutting.  ;)

Thanks. That is real speed, not sped up.

Title: Re: Elephant
Post by: Al W on February 18, 2014, 08:18:19 am

Nicely done.