Scrollsaw Workshop Community -Please register to enable posting.
General Category => Brag Forum => Topic started by: Malistar22 on December 30, 2013, 02:27:42 pm
-
This is the end result of my first attempt at scrolling. It took about 4 hours total and maybe 5-6 blades. (It's taking some time to learn not to bend the crap out of the blades as I thread the holes. I think that more than anything snapped them). My second project was much simpler and took about 30 minutes. Go figure. Start with the harder of the two....
I think it came out fairly well. It's made from 3/4" formica MDF (I think). Not fancy wood but I had it laying around and the white top inspired my inner geek. It's really thick wood, so in my hand, it looks just like a black and white picture, but I assure you, all that black is actually holes in the 'wood'.
-
For the first time you did a yery good Job. Looks greate.
-
That's a slick pattern and you did a bang-up job cutting it. Not the easiest material either. Are you hooked yet?
-
The thing about scrolling is it takes practice. All saws are different and not everyone cuts the same way or with the same skill. It will take a little time to find what is comfortable for you and things will get better. You have done a great job on that Storm Trooper. Looking forward to seeing more of your work as you progress. Thanks for sharing this with us.
DW
-
That's a slick pattern and you did a bang-up job cutting it. Not the easiest material either. Are you hooked yet?
Oh, I am totally hooked. I really want to continue doing pop culture projects. I'm a huge sci-fi fan and video game nerd. I can't see myself doing regular animals or nature scenes, etc. It would get boring fast if I did the typical stencil images. Nothing against those who do of course, it's just not my thing. So I'm trying to find more stencils out there for things like LotR, Game of Thrones, Muppets, video game icons, Star Wars, movie scenes, super hero's, etc. It's not as easy as I thought! The really cool images I have found so far are really tough to turn into stencils. I'm finding myself spending more time looking for the right image than actually scrolling it.
-
Great first project!
-
Well done!
One easily over-looked concern when you first begin scrolling is the type of blades you
choose. For thick wood, I think you should lean toward a blade with FEWER teeth per inch.
That may sound counter-productive but, the reasoning is, the space between the teeth allows
time for the blade to remove the wood chips from the material.
Check a chart that recommends the correct blade for the material being cut and then just
let the blade do the work. Don't force it.
When using thin stock such as 1/8" Baltic Birch (which seems to be the preferred material for
fretwork), it is much easier to stack the sheets together and cut 3 or 4 of the same pattern
at the same time. The thicker wood resulting from stacking the thin sheets makes it MUCH easier
to cut without breaking the thin 1/8" material and you have more copies of your project for the
amount of time at the saw.
You did a fine job! Thanks for sharing and God Bless! Spirithorse
-
For a first project that is great. It will get easier with more practice and that is the all important word...PRACTICE.
Marg
-
Very nice job, looks great and well done, thanks for sharing.
-
Nice Storm Trooper, and listen to what has been said and practice, practice, practice, then practice some more. Pay attention to the blade size, and drill a larger hole if you have room in the pattern to permit the insertion of the blade without bending same.
Hang in there, now that you are hooked, it does get easier.
Al
-
There are methods used by pattern makers to convert an image to a cuttable pattern. You might do a search for GIMP and Inkscape discussions to see how other do that. I attached a description of how I usually do it for your reference.
-
great work for your first piece.thanks for sharing
-
The first project is always the hardest to show, but once you do you realize this is some pretty fun stuff. Your project is pretty decent. Much better than my first project (A cross) and this is something to be proud of. Looking forward to seeing your other work. Thanks for sharing.
-
Excellent work ,especially for a first project. The material you chose to work with is not the easiest to work with, but you did a great job with it.
-
Great job don't be in a hurry let the blades do the work
Stu
-
It takes time trust me, when I first started I picked easy jobs to start with and were still tough, can't count the blades I broke either too loose tension, too tight, made a turn and break one, or not knowing when it was dull and overheat it breaking it. You will get the hang of it. Go to mikesworkshop.com check out his charts and list for the FD blades, I use a reverse 1 for normal jobs, if I go thicker I use and like the ultra reverse has teeth both up and down and use a 1 as well and it cuts good. I also keep watch on the back side on my reverse blades if fuzzies start appearing the blade is getting dull and change it out, blades are cheap easy to get so as soon as it gets dull or close to it or not cutting like I want I pitched it, get a new one makes it easier to cut with a good sharp blade.
Your choice of blade will be different than mine and others find a blade or blades that you like and stick with them. Don't use those from lowes or sears they do work but are high, cheap they will get you by in a pinch might be good to practice with but be better to get some FD(flying dutchman) blades.
-
WOW !!! My first turned out to be fire wood. Nice work.
-
Thanks for all the tips! I've been doing more work since this piece. Haven't taken any pics yet but I will soon. Since this project, I've bought blades from Mike and umm, ya, night and day difference! I'll never buy from anywhere else. Also, I think I've finally tackled the tension issue. I've noticed I can go tighter if I have less wood to cut through. I also removed the hold down and that alone has saved me countless blades! They constantly got bent as I fed them through the pilot hole because the hold down was in the way, which weakened the metal. I think since this project, I probably broke 5 more over the course of maybe 7 or 8 projects? Like I said, night and day difference now. Still got a way to go.
Also, I went out and got 1/4" BB plywood from Menards. It was a tough pill to swallow to buy wood at regular price but I just had to buy a small sheet, just to see the difference in cutting it vs this stuff. I now know why you all prefer BB! It's like cutting a stick of butter compared to MDF. I've done some stack cutting with it (3 pieces at a time) and it's very easy to cut. I can't imagine how easy it would be to cut a 1/8" piece of plywood! What's easier than cutting a warm stick of butter? lol
-
1/8" BB Ply isn't all that easy to cut by itself - kind of jittery - but stacked 3 or 4 deep it's OK. I prefer the look and feel of 1/4" BB Ply for portrait work, and solid material for things like crucifixes. I use the 1/8" for boxes and the like where a thin skin works fine, or for a backer board.
-
Yes 1/8 bb is hard to cut by itself being this thin it really cuts very easy.