Scrollsaw Workshop Community -Please register to enable posting.
General Category => General Scroll Saw Talk => Topic started by: dgman on June 23, 2010, 08:40:04 pm
-
I have been using Olsen blades for fifteen or so years and they have worked fine for me. Recently I have been having trouble with the smaller size blades, 0/2R and 2R.
After tightening the lower blade clamp several times the bottom of the blade would bend like a hockey stick. This would make it difficult to insert the blade into a small hole.
I decided to try some Flying Dutchman Ultra Reverse blades. I ordered some UR1, UR3, and UR5s. They arived yesterday and I tried them out this afternoon.
I tried a UR1 on project that I have been cutting. 3 layers of 1/8" oak plywood. The blade cut very cleanly without any tear out on the bottom. The blade stayed sharp, about 4 times longer than the Olsen's. But most importantly for me, the bottom of the blade did not bend after about a dozen holes cut.
The blades cost about nine dollars more a gross, but they will last a lot longer then the Olsen's so I think they will be more economical.
I just my be a convert!
-
I do not work for Mike, however you get what you pay for. I must admit I have found his blades very cost effective.
Dan
-
Flying Dutchman Blades are the best on the planet. Once you try them, your hooked. LOL 8)
-
Not to mention speed. When you buy from Mike it won't be a week. Generally it will be two days and you have them. He ships wicked fast. If I order Monday morning I will have them on Wednesday in my hands! ;D
-
I always used Olson blades....then I tried Flying Dutchmen and I LOVE THEM!! Last a long time, don't bend or break...cuts through anything...
Olson is still a good blade and I like using them...but Flying Dutchmen are hard to beat.
-
When I first started scrolling, I used Olsons also, and it seemed like I was changing blades constantly, then I heard about the flying dutchmans and gave them a try. I now use only flying dutchmans. The smallest blade I use is a #3 so I can't relate to the bending. The Flying Dutchmans definitely stay sharper longer. As far as the price difference I feel I was using twice as many of the Olson blades. I am very satisfied with Flying Dutchman Blades, and Mike is a great guy to do business with.
-
i use the flying dutchman blades exclusively and couldnt be happier.
i have to admit i have a little in with mike because when i need blades i just stop by his house and pick them up in person(he lives 20 miles from 2 of my kids so its worth the trip). just getting to sit and visit with mike and talk to him is worth the trip to me. he is a wealth of knowledge and really fun to talk to. you would not believe how may blade he has in stock. it would blow most people minds, i know it blew mine.
keep up the great work mike, i really enjoy stoping and talking and ofcourse buying a few supplies as long as im there.
kendall
-
I call your attention to the following from Mike's website...
Quality is when the customer comes back, not the product.
I ordered a gross of mixed blades from Mike this morning about 9:30...by 10:00 I had an email from Mike telling me they would go out in the afternoon mail!
So If you order early in the day your blades most likely will leave Brandon, SD the same day. Where else do you get that kind of service?
And the blades themselves are First Rate!
-
What's mikes site address again? I usually but my fd blades from the Wooden Teddy Bear.
-
http://www.mikesworkshop.com/index.htm (http://www.mikesworkshop.com/index.htm)
Tell Mike we all sent ya!!!
-
I have always found Mike to be one of the nicest people around. I haven't seen him for a few years, because I don't get to the shows much anymore, but he is always friendly and helpful and knowledgeable. Besides that, his products are great. All I have ever heard from others is that the service is more than you could ask for. You can't go wrong using his blades. :)
Sheila
-
I found Mike's site and Flying Dutchman blades thru this site very early in my scroll sawing experience. His product and service are the best, I wouldn't hesitate to recommend him to anyone. He is efficient and very helpful.
Gary
-
Mike is an example of what "immigrants' have done for this country!
Glad you are here Mr. Mike!
~~~GrayBeard~~~
-
I started using FD URV myself. I am very happy and have took photo's to compare the FD and another brand. I found myself purchasing a gross of #3's to suit my needs to cut ornaments.
-
I just placed an order on Tuesday and I received it in the mail today Thursday. Now that is quick, and I live in the middle of no where. Thanks Mike.
-
Dang... I should have ordered from Mike! Is it FD Mike? I have such a hard time keeping people's names and ID's straight. I guess I'm old :o
-
Janet, Your not getting older, your getting better! ;D
Its www.mikesworkshop.com.
-
Yes Janet , FD Mike.
Here is the link:
http://www.mikesworkshop.com/ (http://www.mikesworkshop.com/)
8)
-
I have used several brands of blades but have to say I echo most of the replys. Flying Dutchman all the way.