Author Topic: Steve has done it again!!!  (Read 4158 times)

Offline GrayBeard

  • *****
  • Hero Member
  • Posts: 7088
  • My DW 788 sends you HUGZZZZ from Missouri, USA!
    • View Profile
Steve has done it again!!!
« on: January 04, 2011, 01:27:41 am »
Steve in his graciousness has placed this section on the Forum as a direct result of OUR Requests!!!

For this we THANK Steve once again for being the gracious host that he is!

IF you have a COMPUTER related question THIS is where it belongs, not in General Scroll Saw Talk or The Coffee Shop.

I know a number of our members are 'computer geeks' and they will be the ones answering your questions and 'attempting' to solve your problems.
There are NO Guarantees that their answers are totally correct nor is there any responsibility nor liability to be inferred by Steve Good for their answers or any damage that may occur from following suggestions made by the posters.

They, according to their knowledge, will try to give you the information required to 'solve your problem'. If it works...say Thank You and put $50 back in your pocket!

If it doesn't, well they tried.

These machines of ours are very intricate and complicated pieces of electro-technology. Couple this with the endless variety of software and configurations and it makes solving 'computer problems' by remote a difficult and HAZARDOUS exercise.

When you have a question....
A. Describe the problem as fully as possible.
B. Tell us exactly what you were doing when the problem occurred!
C. Describe your computer, operating system, peripherals and give as much information as possible since all the parts and software are INTER-RELATED.

Do Not Expect Miracles!
But we will try to help and make suggestions!

~~~GrayBeard~~~
I never really wanted to grow up....All I wanted was to be able to reach the cookie jar...and play with my DW 788

Dawie

  • Guest
Re: Steve has done it again!!!
« Reply #1 on: January 04, 2011, 07:08:58 am »
Thanks Steve.
Well said GB.
David

Offline Merlin

  • *****
  • Hero Member
  • Posts: 1191
    • View Profile
Re: Steve has done it again!!!
« Reply #2 on: January 04, 2011, 02:48:22 pm »
Nice one Steve, you da man, and well put GB.
never know when this section may be needed.

***Merlin***
Try not! Do,
or do not
There is no try

Yoda "Empire Strikes Back" 1980

boxmaker

  • Guest
Re: Steve has done it again!!!
« Reply #3 on: January 04, 2011, 07:03:09 pm »
Thanks Greybeard for requesting this topic, and Thank You to Steve for making it happen. This may not be a busy Category, but when we need it, it will sure be nice.

                                                              Mark

Offline dunk

  • *****
  • Hero Member
  • Posts: 1625
  • Staying positive.
    • View Profile
    • Mike's Wood-n-Things
Re: Steve has done it again!!!
« Reply #4 on: January 04, 2011, 07:10:38 pm »
Thanks for the request and thank you for making it happen Steve.
Mike

Junk is something you've kept for years and throw away three weeks before you need it.

NJ Phil

  • Guest
Re: Steve has done it again!!!
« Reply #5 on: January 04, 2011, 08:01:36 pm »
Steve in his graciousness has placed this section on the Forum as a direct result of OUR Requests!!!

For this we THANK Steve once again for being the gracious host that he is!

IF you have a COMPUTER related question THIS is where it belongs, not in General Scroll Saw Talk or The Coffee Shop.

I know a number of our members are 'computer geeks' and they will be the ones answering your questions and 'attempting' to solve your problems.
There are NO Guarantees that their answers are totally correct nor is there any responsibility nor liability to be inferred by Steve Good for their answers or any damage that may occur from following suggestions made by the posters.

They, according to their knowledge, will try to give you the information required to 'solve your problem'. If it works...say Thank You and put $50 back in your pocket!

If it doesn't, well they tried.

These machines of ours are very intricate and complicated pieces of electro-technology. Couple this with the endless variety of software and configurations and it makes solving 'computer problems' by remote a difficult and HAZARDOUS exercise.

When you have a question....
A. Describe the problem as fully as possible.
B. Tell us exactly what you were doing when the problem occurred!
C. Describe your computer, operating system, peripherals and give as much information as possible since all the parts and software are INTER-RELATED.

Do Not Expect Miracles!
But we will try to help and make suggestions!

~~~GrayBeard~~~
[/quoteDoes anyone know of a program like Gimp that will run on a MAC? I have download it and it will not work.

HWPlmbr1

  • Guest
Re: Steve has done it again!!!
« Reply #6 on: January 04, 2011, 10:46:03 pm »
That's good but can he say it in 30 seconds or less!  :D

Offline Judy Hunter

  • *****
  • Hero Member
  • Posts: 2690
  • The world moves on.
    • View Profile
    • Artistic Sawdust and Other Fun Stuff
Re: Steve has done it again!!!
« Reply #7 on: January 05, 2011, 09:52:29 am »
There is a lot of gobble-dee-gook out there about computers.

THANKS Steve and thanks all puter geeks (unless you are the geeks type that bites heads off chickens)
I think we need a new name for the "computer smarty"
I'm from North Dakota

Offline GrayBeard

  • *****
  • Hero Member
  • Posts: 7088
  • My DW 788 sends you HUGZZZZ from Missouri, USA!
    • View Profile
Re: Steve has done it again!!!
« Reply #8 on: January 05, 2011, 03:38:19 pm »
OK Judy....

Let's go with "TECHIE"!!!

~~~GB~~~
I never really wanted to grow up....All I wanted was to be able to reach the cookie jar...and play with my DW 788

Offline yyyyyguy

  • *****
  • Hero Member
  • Posts: 941
  • yyyyyguy
    • View Profile
Re: Steve has done it again!!!
« Reply #9 on: January 05, 2011, 11:17:38 pm »
Now Steve...did you put this here just because of me?? :-[ :-[ :-[
I love the smell of saw dust in the morning.

 

SMF

Teknoromi