Scrollsaw Workshop Community -Please register to enable posting.
General Category => Computer questions => Topic started by: GrayBeard on January 04, 2011, 01:27:41 am
-
Steve in his graciousness has placed this section on the Forum as a direct result of OUR Requests!!!
For this we THANK Steve once again for being the gracious host that he is!
IF you have a COMPUTER related question THIS is where it belongs, not in General Scroll Saw Talk or The Coffee Shop.
I know a number of our members are 'computer geeks' and they will be the ones answering your questions and 'attempting' to solve your problems.
There are NO Guarantees that their answers are totally correct nor is there any responsibility nor liability to be inferred by Steve Good for their answers or any damage that may occur from following suggestions made by the posters.
They, according to their knowledge, will try to give you the information required to 'solve your problem'. If it works...say Thank You and put $50 back in your pocket!
If it doesn't, well they tried.
These machines of ours are very intricate and complicated pieces of electro-technology. Couple this with the endless variety of software and configurations and it makes solving 'computer problems' by remote a difficult and HAZARDOUS exercise.
When you have a question....
A. Describe the problem as fully as possible.
B. Tell us exactly what you were doing when the problem occurred!
C. Describe your computer, operating system, peripherals and give as much information as possible since all the parts and software are INTER-RELATED.
Do Not Expect Miracles!
But we will try to help and make suggestions!
~~~GrayBeard~~~
-
Thanks Steve.
Well said GB.
David
-
Nice one Steve, you da man, and well put GB.
never know when this section may be needed.
***Merlin***
-
Thanks Greybeard for requesting this topic, and Thank You to Steve for making it happen. This may not be a busy Category, but when we need it, it will sure be nice.
Mark
-
Thanks for the request and thank you for making it happen Steve.
-
Steve in his graciousness has placed this section on the Forum as a direct result of OUR Requests!!!
For this we THANK Steve once again for being the gracious host that he is!
IF you have a COMPUTER related question THIS is where it belongs, not in General Scroll Saw Talk or The Coffee Shop.
I know a number of our members are 'computer geeks' and they will be the ones answering your questions and 'attempting' to solve your problems.
There are NO Guarantees that their answers are totally correct nor is there any responsibility nor liability to be inferred by Steve Good for their answers or any damage that may occur from following suggestions made by the posters.
They, according to their knowledge, will try to give you the information required to 'solve your problem'. If it works...say Thank You and put $50 back in your pocket!
If it doesn't, well they tried.
These machines of ours are very intricate and complicated pieces of electro-technology. Couple this with the endless variety of software and configurations and it makes solving 'computer problems' by remote a difficult and HAZARDOUS exercise.
When you have a question....
A. Describe the problem as fully as possible.
B. Tell us exactly what you were doing when the problem occurred!
C. Describe your computer, operating system, peripherals and give as much information as possible since all the parts and software are INTER-RELATED.
Do Not Expect Miracles!
But we will try to help and make suggestions!
~~~GrayBeard~~~
[/quoteDoes anyone know of a program like Gimp that will run on a MAC? I have download it and it will not work.
-
That's good but can he say it in 30 seconds or less! :D
-
There is a lot of gobble-dee-gook out there about computers.
THANKS Steve and thanks all puter geeks (unless you are the geeks type that bites heads off chickens)
I think we need a new name for the "computer smarty"
-
OK Judy....
Let's go with "TECHIE"!!!
~~~GB~~~
-
Now Steve...did you put this here just because of me?? :-[ :-[ :-[