Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Dakota Saw Dust

Pages: 1 [2] 3 4 5
16
The Coffee Shop / Happy Birthday FD Mike
« on: October 10, 2015, 07:48:17 pm »
Sunday 10/11/15 Mike turns a young 85.  He's scrolling like there is no tomorrow. I posted a small deer he made to give away - about a month or so ago. He has now passed the 1,000 mark along with other projects. I'm sure he'd like a how'd.
The business [work] he doesn't miss it's talking with the people about scrolling. Happy Birthday Mike ;)

17
Brag Forum / Proud Mom
« on: August 14, 2015, 01:25:38 pm »
Our son's first high school girl friend is someone the wife & I have kept in touch with through the years. This Aug. her oldest boy has graduated high school & enlisted in the Army. Wife saw this Sue Mey pattern and I had to cut it. We're not to sure just how Tammy will want to display the plate so I included a simple but effective stand designed by Sheila Landry.  The last credit goes to Steve Good for the flag artwork I used for the backing.  I think he used it in a clock - not sure. Oh yes - it's cut from 1/2" Maple. Thanks for looking.  Cheers Brian

18
Brag Forum / Steve's Stinkers
« on: July 24, 2015, 06:47:38 pm »
i just had to cut this one. I painted the white strips and glued them back in. Thanks for looking. Brian
P.S. Keep your stinking comments to your self. :)

19
Brag Forum / What does FD Mike do ?
« on: July 15, 2015, 04:01:16 pm »
Scroll OF COURSE.  I challenge anyone who says Mike has retired. At last count Mike has cut 526 of these little deers.  He gives them away left and right and has a hard time keeping up. He stake cuts 6 at a time in blocks of two, ie 12 deers. I think he has probably cut out another 12 while I am writing this post w/pic.  :)  It measures 2 1/4"H by 1 5/8"W by 1/8". I believe the in the photo is as Ash.

20
Brag Forum / For my sisters
« on: June 29, 2015, 09:00:06 pm »
My younger sister is into oriental decor and the other sister is a quilter.  The John Nelson Japanese Mantle Clock is for the younger and I finally found a pattern I think my other sister will like.  Quilting and scrolling are a hard mix.  I think this Sue Mey Quilted cross is acceptable and had the help of a professional quilter so I couldn't muck it up to much.  Thanks for looking. Brian

21
The Coffee Shop / Cowboys are smart
« on: June 16, 2015, 08:01:51 pm »
    BUD the Cowboy
A cowboy named Bud was overseeing his herd in a remote
mountainous pasture in Montana when suddenly a
brand-new 2015 BMW advanced toward him out of a cloud of dust.

The driver, a young man in a Brioni? suit, Gucci? shoes,RayBan? sunglasses and  YSL? tie, leaned out the window and asked the
cowboy, "If I tell you exactly  how many cows and calves you have in your herd, will you give me a calf?"

Bud looks at the man, who obviously is a yuppie, then looks at his peacefully grazing herd and calmly answers, "Sure, why not?"

The yuppie parks his car, whips out his  Dell? notebook computer, connects it to his Apple i phone, and surfs to a NASA  page on the Internet,
where he calls up a GPS satellite to get an exact fix on  his location which he then feeds to another NASA satellite that scans the area  in
an ultra-high-resolution photo.

The young man then opens the digital photo in Adobe Photoshop? and exports it to an image processing facility in Hamburg, Germany .

Within seconds, he receives an email on his  Apple iPad? that the image has been processed and the data stored. He then accesses an
 MS-SQL? database through an ODBC connected Excel? spreadsheet with  email on his Galaxy S5? and, after a few minutes, receives
a response.

Finally, he prints out a full-color, 150-page report on his hi-tech, miniaturized HP LaserJet? printer, turns to the cowboy and says,
"You have exactly 1,586 cows and calves."

"That's right. Well, I guess you can take one of my calves," says Bud.

He watches the young man select one of the animals and looks on with amusement as the young man stuffs it into the trunk of his car.

Then Bud says to the young man, "Hey, if I can tell you exactly what your business is, will you give me back my calf?"

The young man thinks about it for a second and then says, "Okay, why not?"

"You're a Congressman for the U.S. Government", says Bud.

"Wow! That's correct," says the yuppie, "but how did you guess that?"

"No guessing required." answered the cowboy. "You showed up here even though nobody called you; you want to get paid for an answer I
already knew, to a question I never asked. You used millions of dollars' worth of equipment trying to show me how much smarter than me
 you are; and you don't know $&#% about how working people make a living - or about cows, for that matter. This is a herd of sheep."

"Now give me back my dog."



 

AND

THAT FOLKS IS WHAT THE PROBLEM
IS.

 

 

 

22
General Scroll Saw Talk / RBI Hawk users - Help
« on: May 06, 2015, 01:23:48 pm »
Just picked up a used Hawk and am not to enthralled with blade clamping and tension methods.  I thought once the rear tension cam was set all one had to do was use the front tension lever to release the blade [along with the blade screw].  However, I'm finding the rear needs to be readjusted on a regular bases.  Not exactly a time saving design.  The Saw is about a '96 with only about 20 hrs. time on it. I'm pretty used my problem is with the operator. :P  PLEASE share your expertise.  Thanks in advance    Brian

23
The Coffee Shop / Ole & Sven
« on: May 02, 2015, 11:04:51 am »
Ole is the pastor of the local Norwegian Lutheran Church, and Pastor Sven is the minister of the Swedish Covenant Church across the road.

One morning they pounded a sign into the ground, which said:

DA ENDISS NEAR!
TURN YERSELF AROUNT NOW
BAFOR IT ISS TOO LATE!

As a car speeds past them, the driver leans out his window and yells, "Leave people alone, you Skandahoovian religious nuts!"

From the curve, they hear screeching tires and a big splash.

Shaking his head, Rev. Ole says, "Dat's da terd one dis mornin."

"Yaa," Pastor Sven agrees, then asks, "Do ya tink maybe da sign should yust say, 'Bridge out?'"


24
Tutorials, Techniques and Tips / Top or bottom feed
« on: April 19, 2015, 02:53:07 pm »
This old dog picked up a new trick [for me]. I have always been a top feeder. But I learned a new "trick" I was cutting a small frog clock from 1/2" pine and it had some of those single line interior cuts. I hate drilling a larger entry just so I can bottom feed a FD blade with it's top blade crimp. But I was able to top feed AND use the recommended hole size. Then low and behold when I wanted to switch from a flat blade to spiral, I found it much easier to top feed. I just had to teach this old dog how to connect the blade under the table. My point sometimes mixing things up can be good.   Brian 

25
Brag Forum / Easter Cross
« on: April 02, 2015, 01:51:38 pm »
I had to show off one of Steve's designs cut by Mike Moorloch [FD Mike] It is three inches tall ,out of 1/8" hardwood, stack cut 6 high, drilled with a #71,and cut with a FD-UR #1 & #3. Now that he's retired he is getting back into the swing of things. 
PS The subject matter saws it all - HAPPY EASTER   Brian

26
Brag Forum / Looking for a Mate
« on: March 29, 2015, 03:16:45 pm »
Thanks for the video & Pattern Russ [Simply wood creations]. I just had to do this one. Since I've taken over the laundry duties, my mate can now find her mate - sock that is.  Thanks for looking.  Brian

27
General Scroll Saw Talk / Delta Blade holder - help!
« on: March 27, 2015, 09:05:11 pm »
Read about the upper blade hold on the Dewalt and replacement.  Has anyone faced that stripped out condition on a Delta 40-690?  I went on Deltaportacable.com but they don't recongese my model.  I'd rather buy a replacement than learn new mechanist skills.  Thanks in advance  Brian

28
Brag Forum / Guardian Angel
« on: March 06, 2015, 11:28:22 am »
Finally got around to my "bucket" list of projects. This segmentation by Paul Meisel in the holiday issue 2007 of SSWC just had to be done.   
Thanks for looking. And of course - comments are always welcomed.  Brian

29
Brag Forum / The Shop Clock
« on: February 19, 2015, 07:24:28 pm »
Not a lot of work on this project - Thanks Steve ;)  But something my shop has needed for a long time. It says it all.  Brian

30
General Scroll Saw Talk / Air tube for Delta scroll saw
« on: February 09, 2015, 08:54:27 pm »
 :-\  The plastic tube fitting attaching to the metal of the Delta 40=690 cracked and now the air tube has a mind of it's own. I tried deltaportercable.com but they don't show any listing for Delta replacement parts. I'm presently trying  superglue - but don't think it will hold. Any pointers out there before I go to a local tool sales/service in my area?  Thanks in advance.   Brian

Pages: 1 [2] 3 4 5

SMF

Teknoromi