Scrollsaw Workshop Community -Please register to enable posting.
General Category => Ask Steve a question. => Topic started by: hayu on November 20, 2016, 10:56:51 am
-
Is there anyway to make the Bezier line thicker or a different color? I have trouble seeing the line.
-
What program are you using?
In Inkscape you just change the stock. Change colour or edit the thickness.
Don
-
see attached image
in Inkscape go to the bottom left corner (see the number 1)
right click on that and from the pop up box choose your thickness
to change colour go to the colour bar along the bottom of the screen, put your cursor on the colour you want, right click and choose " set as stroke"
Dave
-
I use Coral 7.
-
Hi hayu
I have Corel Draw 9
To make the bezier line thicker, once you have the line drawn
click on the outline tool, you will see options to pick what thickness you want
Also while you have the outline tool open you will see a outside color dialogue chart
click on that and when the new window opens click on RGB and pick you color
This should give you what you want
Hope this helps you a bit
Fab4