Hi Steve:
With respect to the vacuum is noisy even with the box and if heated no ventilation.
After long periods is unbearable and you get irritated easily.
My solution was first connected to the outlet of the blower hose pump to inflate tires Eliminator 12v.
I lasted like a year.
Now I plugged it into the wall a fan adapted to the height of the table did giratotio to give wind direction and not to interfere sawdust where the saw goes.
the fan is using an old microwave.
is connected directly to a 120v power that has its own coil to reduce the voltage
Until now it works fine, no noise, but the dust are not going to easily remove at least you can see where you work and do not irritate the nerves.
Greetings from Puebla, Mexico
