16
Intarsia / Re: TT Rider Geoff Duke on Manx Norton Intarsia
« on: March 18, 2016, 10:01:26 pm »
Outstanding piece of art! Well done!
News: Had a couple issues with the forum today. 1/19/2017. I believe I have them corrected now. Let me know if you have any trouble. Thanks.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
Brag Forum / Re: 1st Intarsia
« on: March 10, 2016, 02:08:32 pm »
You guys probably know it's a seashell. My brother thought it was a waffle cone with chocolate ice cream, my Dad said it was obviously a cluster of grapes, and a friend thought it was a pastry surrounded by strawberries. I had to explain that I took the pic while I was finishing it on my lazy Susan finishing wheel. The other item I was lacquer spraying is a sanding block I made for a friend. Blue tape is covering the cork.
19
General Scroll Saw Talk / Re: Air hose upgrade
« on: March 09, 2016, 07:33:52 pm »
That's a great idea Jim. I repaired it again by removing the cracked piece on the end and reinstalled it. We will see how long it lasts. I found instructions from Steve I think from last summer.
20
Swap Shop / Re: FD Blades for sale or trade *updated 03/08/16*
« on: March 08, 2016, 12:27:13 pm »
Updated my price today
21
General Scroll Saw Talk / Air hose upgrade
« on: March 07, 2016, 04:47:34 pm »
Is there a better air hose replacement for a delta 40-560? My original keeps breaking at the attachment point and it's getting too short.
22
Brag Forum / 1st Intarsia
« on: March 01, 2016, 08:28:30 pm »
Just finished my first one and would like to attach to this post but I keep getting a file size error. Any ideas on how to resize my pic? Should would like to brag to you pros! 
23
Intarsia / White for intarsia
« on: March 01, 2016, 11:47:24 am »
When intarsia patterns suggest white what wood and/or stain are you guys using? I can't find white gel stain.
24
Swap Shop / Re: FD Blades for sale or trade
« on: February 27, 2016, 06:41:53 pm »
DFW area of Tx
25
Swap Shop / FD Blades for sale or trade 03/17/16 update *SOLD*
« on: February 26, 2016, 08:57:43 pm »
I have the following brand new flat end:
UR 1 - 2 dz
UR 3 - 4.5 dz
UR 5 - 4 dz
SR 2/0 - 4 dz
SR 3 - 4.5 dz
SR 5 - 5.5 dz
Polar 5 - 1 dz
PSR 5 - 1 dz
Will sell for $2 dz buyer pays for shipping and handling.
Will trade for Olson MACH, PGT, or Reverse Skip. Or you may make a trade offer.
Thank you for your consideration.
Send me a message if interested
03/08/16. Either my price is too high or y'all have too many blades.. As of today, I will sell each dozen for $1.25 or if you will buy all 26.5 dozen, I'll take $26.50 for the whole thing. If you have something you'd like to trade me just let me know. I'd prefer that buyer pays shipping which shouldn't be much in the US.
UR 1 - 2 dz
UR 3 - 4.5 dz
UR 5 - 4 dz
SR 2/0 - 4 dz
SR 3 - 4.5 dz
SR 5 - 5.5 dz
Polar 5 - 1 dz
PSR 5 - 1 dz
Will sell for $2 dz buyer pays for shipping and handling.
Will trade for Olson MACH, PGT, or Reverse Skip. Or you may make a trade offer.
Thank you for your consideration.
Send me a message if interested
03/08/16. Either my price is too high or y'all have too many blades.
. As of today, I will sell each dozen for $1.25 or if you will buy all 26.5 dozen, I'll take $26.50 for the whole thing. If you have something you'd like to trade me just let me know. I'd prefer that buyer pays shipping which shouldn't be much in the US.26
General Scroll Saw Talk / Re: Olsen blades
« on: February 26, 2016, 01:48:29 pm »
Sheila, I still don't see Olson reverse skip or plain skip in size 1. Am I just not seeing it?? The reverse skip goes from 2/0R, to 2R to 5R. I'm assuming Olson doesn't make that blade in 1R or 3R, which to me would be odd since those are popular sizes especially size 3.
Bob, I must admit I do portraits with FD spirals (and like that blade) and I am going to retry my FD UR 1's.
Bob, I must admit I do portraits with FD spirals (and like that blade) and I am going to retry my FD UR 1's.
27
General Scroll Saw Talk / Olsen blades
« on: February 26, 2016, 08:18:00 am »
I mainly use skip reverse Olsen blades. I need some #1's and #3's but can't find them in skip reverse. I guess they don't make those sizes. Do you guys have Olsen recommendations for those sizes? I have Flying Dutchman but I don't like them. I know I know most of you guys love them. On that note I have dozens and dozens of FD and won't ever use them.
28
Pattern Requests. / Re: Need Portrait Pattern made please
« on: January 13, 2014, 05:49:07 pm »
Oh Wow! Those are both really good! I really appreciate you both!!
29
Pattern Requests. / Need Portrait Pattern made please
« on: January 12, 2014, 07:54:45 pm »
One of our friends kids just got married and I want to make a portrait for them, but don't know how to make a pattern. Can someone help me please.
Thanks!!!
Thanks!!!
30
Brag Forum / 1st Portrait completed
« on: March 06, 2012, 09:22:09 pm »
This took a while to complete but I'm pleased with the results. The family of this boy that died in an auto accident were speechless. Thanks again to Charlie Dearing for the pattern.
Chris
Chris
