Scrollsaw Workshop Community -Please register to enable posting.

General Category => Pattern Requests. => Topic started by: Richard 33 on March 12, 2017, 11:31:39 am

Title: Two patterns needed
Post by: Richard 33 on March 12, 2017, 11:31:39 am

I have two co workers who have made special requests and while I have tried to make the patterns for their requests, I have not been successful.
The first would be about 8x10 or so, it would have scroll work framing the words "Always kiss your investigator goodnight ". The second would be a circle with the letters BA in the center. This would be about three or four inches in diameter and would be used as a keychain.
Any help would be appreciated.

Title: Re: Two patterns needed
Post by: spirithorse on March 12, 2017, 10:02:01 pm

Greetings,
If you go to Steve Good's cataloge here http://www.stevedgood.com/catalog/
you can find a fretwork frame and then, you can just type in "Always kiss your investigator goodnight" as you requested using a font called Freefrm 721 Blk which can be scrolled out
with-out any of the inside cuts falling apart. Type it as large as you want to fit inside the frame.

Also, , you can trace a circle around a cap or just Google circle images to get the size circle you
want and then, using the same Freefrm font, type BA as large as you want and glue or tape it
to your circle for the pattern.
God Bless! Spirithorse
P.S. Other fonts like scrollsoni will work also. Just find a font that is usable for the scrollsaw.

Title: Re: Two patterns needed
Post by: Donrob on March 13, 2017, 12:47:09 am

Here is the "BA" Cut the white
Don R

Title: Re: Two patterns needed
Post by: Richard 33 on March 13, 2017, 07:57:30 am

Thank you guys.

Title: Re: Two patterns needed
Post by: spirithorse on March 14, 2017, 02:01:57 am

Cool pattern, Don,
I just pictured a solid round hardwood with the letters cut in
the center.
Thanks for helping and God Bless! Spirithorse

Title: Re: Two patterns needed
Post by: Swampy on March 16, 2017, 05:16:25 pm

Richard,

Try this one on for size? The frame itself is a 8x10, the pic size is 5X7.

Regards,

Swampy

Title: Re: Two patterns needed
Post by: Tomsunnu on March 17, 2017, 05:31:49 am

Nice  pattern Don  :) thanks for helping.