Messages

31

Brag Forum / Arkansas Razorbacks wall Plaque

« on: December 08, 2018, 11:10:58 am »

Had a friend that shared this pattern with me and here it is , a learning experience for sure. . Made out of 1/8" BB Plywood thickness by 12" by 12" in size and the backer board is BB  Plywood which is painted Flat  Black and I build a pine frame it sitting on and its all just glued together . Any comments Welcomed ....

32

Brag Forum / Steve Good Pattern

« on: December 08, 2018, 10:57:52 am »

Made out 1/8" BB Plywood  material with Walnut backer and lid , have had several calls to price and and make . Will have to come to some conclusion that would far to the customer and too me on the price , cause this isn't a just cut and go project . Any comments welcomed .......

33

Brag Forum / Custom name Cedar Key Ring Holder

« on: May 31, 2018, 06:29:21 pm »

Made this for my cousin that lives in Louisiana that lives in one of the biggest fifth wheel Campers with 3 or  4 pull outs . Anyway space is a question , so he was happy with it . Not sure where the pattern came from since I've had it seems like forever . Made out 1/2" Cedar , but have made one without the name in it years ago . After posting on Facebook have a order for one to make one with the custom name in it . Sometimes it's alright to sell some of my projects , but sometimes I get orders that keep me a little busier than I want . But I'm not  complaining , I'll get it made and delivered  tho . Any comments welcomed ....

34

Brag Forum / Dentist Plaque

« on: May 11, 2018, 08:06:56 am »

Made for appreciation for my  Dentist friend and Christian man , delivered yesterday and he was shocked and I'm glad too. Made out of soft Pine and has a white crackle finish applied . A Steve Good Pattern , any comments are welcomed ......

35

Brag Forum / Re: Steve Good's HE IS RISEN

« on: April 23, 2018, 01:08:13 am »

Love it , fine work too !

36

Brag Forum / Re: Steve Good Spiral Bowl

« on: April 23, 2018, 01:07:04 am »

Nice job 👍

37

Brag Forum / Cell phone holder

« on: April 22, 2018, 07:55:56 pm »

These cell phone holder were made out of 1" & 1/4"  Brazilian Cherry material . Put my grandkids  initials on them , ( this is some real hard material but beautifully when finished . Ones a man and then the cat one , any comments are welcomed ......

38

Brag Forum / Re: Believe Plaques

« on: March 15, 2018, 04:51:51 pm »

Didn't stack cut , these were 1/2" material Believe Plaques  . Cut one at a time , getting a jump on door prizes for our Sunday School Christmas party for this a December . Doing it now since I have the time to make them .

39

Brag Forum / Re: ASU Red Wolve prototype Plaque

« on: March 15, 2018, 04:48:12 pm »

Red Wolves are a college mascot - Arkansas State  University red wolves

40

Brag Forum / Believe Plaques

« on: March 14, 2018, 07:41:05 pm »

Made these plaques out of 5/8" soft Pine , had these glued up for some time now and decided today to knock them out . Pattern of this project came from  joscrolls in November 2009 . Any comments are welcomed ......

41

Brag Forum / ASU Red Wolve prototype Plaque

« on: March 13, 2018, 01:31:08 am »

Been working on the pattern for quite some time just getting it ready to cut, here it is made out of 3/4" Maple material . Still likes several coats of high gloss Glaze coats to make it gleam . Any comments are welcomed ........

42

Brag Forum / WOO PIG SOOIE Plaque

« on: February 15, 2018, 07:17:40 pm »

Pattern from my wife Jane , I cut out of Maple material and painted Red and clear gloss glazed . This is the first of this series , have three  more in the series of sayings that have the Razorback on them . Any comments welcomed ......

43

Brag Forum / Hogs plaques

« on: February 09, 2018, 08:38:59 pm »

Made the two Razorback Plaques unfinished ones yesterday and today , Razorback and Hogs word  is cut from 1" Maple the base is 3/4" Maple material. I know it's a little thick for a scrollsaw but it looks better cut out of the thick material .  Have an order for four of these , any comments are welcomed .....

44

Brag Forum / Re: I'm a Pickup Man Key Ring Holder

« on: January 21, 2018, 09:29:26 am »

Nice. I made a key ring holder from a modified pattern from Steve Good. Your pattern looks well done. Nice and shiny red. Mine was in the shape of a cowboy hat and had a cowboy and horse as part of the design. Love seeing modified patterns. Thanks for sharing.

.   Thanks

45

Brag Forum / Re: Flash Drive Holder

« on: January 21, 2018, 09:17:26 am »

Nice. How many flash drives does she own? I have one and it holds a ton of files. But I guess if someone has a lot of need that would do it. Thanks for sharing.

.      This was her first Flash Drive Holder  , Steve Good offered a 6 space flash Drive Pattern and the wife   Altered pattern to make the 12 space I made . Done have one of my good friends that said his wife would love one for Christmas , so looks like I'll make another one the future now . Thanks