Topics

1

Brag Forum / Garth Brooks Wall Plaque

« on: December 07, 2019, 10:20:34 am »

Had a order for the Wall Plaque of  Garth Brooks , cut from 1/8" BB Plywood and the backer BB Plywood sprayed flat Black and build a frame around the backer board and installed a Saw tooth hanger on it . Customer was delighted with it .

2

Brag Forum / Steve Good Nativity box

« on: December 07, 2019, 08:40:42 am »

Made my first one many months ago and entered it in too the Northeast Arkansas Fair and won first place , received a 8 piece order and just got them finished for Christmas presents for a Customer . Used  1/8" Baltic Birch Plywood and 1/4" Walnut material for the top and base of this project  . Don't let this project fool you in making  multiples it is a lot of work . It's 7 layers to glue together and your cuts will need to be  Percise  if not they'll be more sanding involved . These have  several layers of lacquer finish with several sandings in between coats .

3

Brag Forum / Roses & Vine Name Plaque

« on: March 19, 2019, 08:59:07 am »

Customer special order : I'm used to making regular name plaques using Steve Good's name app printer  , this time my wife was ask if she could make an add on to the name  Plaque and she did. I cut it out of 5/8" soft Pine material and she did the hand painting for me . And I stained it before her painting and did add several light charts of gloss  lacquer  . The customer approved the pattern before I cut it , and the customer was well pleased with out come ..... any comments are welcomed .... and

4

Brag Forum / San Francisco 49ers plaque

« on: March 19, 2019, 08:47:00 am »

A customer special order , my wife made this pattern for me to cut - and I made the S F  cutting out of 1/8" Baltic Birch Plywood as well as the backed board and made the small frame for the backer board to sit on and I  installed the picture frame Saw tooth hanger to be hung on the wall . I thought that 49ers should be on it - but not what the customer wanted . My wife did all the hand and spray painting on this project , any comments welcomed ..... MB

5

Brag Forum / Arkansas Razorbacks wall Plaque

« on: December 08, 2018, 11:10:58 am »

Had a friend that shared this pattern with me and here it is , a learning experience for sure. . Made out of 1/8" BB Plywood thickness by 12" by 12" in size and the backer board is BB  Plywood which is painted Flat  Black and I build a pine frame it sitting on and its all just glued together . Any comments Welcomed ....

6

Brag Forum / Steve Good Pattern

« on: December 08, 2018, 10:57:52 am »

Made out 1/8" BB Plywood  material with Walnut backer and lid , have had several calls to price and and make . Will have to come to some conclusion that would far to the customer and too me on the price , cause this isn't a just cut and go project . Any comments welcomed .......

7

Brag Forum / Custom name Cedar Key Ring Holder

« on: May 31, 2018, 06:29:21 pm »

Made this for my cousin that lives in Louisiana that lives in one of the biggest fifth wheel Campers with 3 or  4 pull outs . Anyway space is a question , so he was happy with it . Not sure where the pattern came from since I've had it seems like forever . Made out 1/2" Cedar , but have made one without the name in it years ago . After posting on Facebook have a order for one to make one with the custom name in it . Sometimes it's alright to sell some of my projects , but sometimes I get orders that keep me a little busier than I want . But I'm not  complaining , I'll get it made and delivered  tho . Any comments welcomed ....

8

Brag Forum / Dentist Plaque

« on: May 11, 2018, 08:06:56 am »

Made for appreciation for my  Dentist friend and Christian man , delivered yesterday and he was shocked and I'm glad too. Made out of soft Pine and has a white crackle finish applied . A Steve Good Pattern , any comments are welcomed ......

9

Brag Forum / Cell phone holder

« on: April 22, 2018, 07:55:56 pm »

These cell phone holder were made out of 1" & 1/4"  Brazilian Cherry material . Put my grandkids  initials on them , ( this is some real hard material but beautifully when finished . Ones a man and then the cat one , any comments are welcomed ......

10

Brag Forum / Believe Plaques

« on: March 14, 2018, 07:41:05 pm »

Made these plaques out of 5/8" soft Pine , had these glued up for some time now and decided today to knock them out . Pattern of this project came from  joscrolls in November 2009 . Any comments are welcomed ......

11

Brag Forum / ASU Red Wolve prototype Plaque

« on: March 13, 2018, 01:31:08 am »

Been working on the pattern for quite some time just getting it ready to cut, here it is made out of 3/4" Maple material . Still likes several coats of high gloss Glaze coats to make it gleam . Any comments are welcomed ........

12

Brag Forum / WOO PIG SOOIE Plaque

« on: February 15, 2018, 07:17:40 pm »

Pattern from my wife Jane , I cut out of Maple material and painted Red and clear gloss glazed . This is the first of this series , have three  more in the series of sayings that have the Razorback on them . Any comments welcomed ......

13

Brag Forum / Hogs plaques

« on: February 09, 2018, 08:38:59 pm »

Made the two Razorback Plaques unfinished ones yesterday and today , Razorback and Hogs word  is cut from 1" Maple the base is 3/4" Maple material. I know it's a little thick for a scrollsaw but it looks better cut out of the thick material .  Have an order for four of these , any comments are welcomed .....

14

Brag Forum / I'm a Pickup Man Key Ring Holder

« on: January 19, 2018, 06:59:40 pm »

A Steve Good pattern - which I turned into a Key Key Ring Holder . Made out of soft Pine material , painted and high gloss glazed and of course added the chain to hang it by . Any comments are welcomed ....

15

Brag Forum / Flash Drive Holder

« on: January 19, 2018, 06:31:56 pm »

A Steve Good Pattern , wife has been wanting one except she wanted a 12 space holder instead of Steve's 6 space holder . The slots were a little of a pain ,  had to tweak the flash drive holes . Made out of soft Pine and lightly stained and  lacquer finished also applied the fuzzy feet to the bottom of the unit . Any comments welcomed .......