Scrollsaw Workshop Community -Please register to enable posting.

General Category => Pattern Requests. => Topic started by: Craigstruzz on September 20, 2020, 06:31:24 pm

Title: mini shadowbox nature scene need to enlarge help
Post by: Craigstruzz on September 20, 2020, 06:31:24 pm

Hello, I downloaded the mini shadowbox nature scene and would like to enlarge it but not having any luck. I would like to enlarge it to 8x11 inches or larger. Any help is greatly appreciated. Thank you

Title: Re: mini shadowbox nature scene need to enlarge help
Post by: don in brooklin on on September 20, 2020, 10:07:36 pm

I will go ahead and enlarge but before I so I want to make sure it is the  Small Nature Scene Shadow Box.  I could not see mini.

The one I looked at is a square 4 x 4.  Just making 8 1/2 11 will distort the image a little but I think it will be okay.

Do you want a PDF or svg.  Each page will be separate if svg.

Title: Re: mini shadowbox nature scene need to enlarge help
Post by: don in brooklin on on September 21, 2020, 06:55:25 am

I went ahead and attached is a PDF that each page is 8 by 8.  If you use Acrobat Reader poster feature you can up to 150 % which would give you 12x 12.

If you go to 8 1/2 x 11 there is some distortion but is okay.  You would have to figure out how to print.

Title: Re: mini shadowbox nature scene need to enlarge help
Post by: ddockstader on September 21, 2020, 12:11:15 pm

I've attached file for 8 1/2 x 11 that I converted through Inkscape. The distortion isn't too bad, just a slightly taller deer.

Dave

Title: Re: mini shadowbox nature scene need to enlarge help
Post by: Craigstruzz on September 21, 2020, 12:59:30 pm

Thanks a bunch. Just what I needed.