Author Topic: Finishing  (Read 3489 times)

math2010

  • Guest
Finishing
« on: December 09, 2012, 01:59:18 pm »
Hi!

What do you suggest to use to finish a puzzle for a child? It as to be non toxic because he will probably put the pieces in his mouth...

Offline Billy in Va

  • *****
  • Hero Member
  • Posts: 1002
  • DONT GROW UP ITS A TRAP!!!
    • View Profile
Re: Finishing
« Reply #1 on: December 09, 2012, 05:21:26 pm »
For a non toxic finish I use a bees wax/mineral mixture.  In a small crock pot I melt the wax and then add some oil. Mix and let cool.  If its it hard, melt again and add more oil.  To soft add more wax. I like it about the consistency of past wax.  I apply it with a scotch brite pad and them buff it off with a soft cloth. This  wax give more of a sheen that a shine and makes the wood feel very soft and smooth.
Common Sense is a flower that does not grow in everyone's garden
Scrollin' - Scrollin' Scrollin' on the River

Offline Rapid Roger

  • *****
  • Hero Member
  • Posts: 1468
  • Hutchinson, Kansas
    • View Profile
Re: Finishing
« Reply #2 on: December 09, 2012, 08:27:13 pm »
Zinsser Bulls Eye Shellac.
Shellac is totally non toxic and used to coat medicine pills and candy and other foods.

Rog
An ounce of responsablity is worth 10 pounds of state and fedral laws.

Offline dgman

  • *****
  • Hero Member
  • Posts: 6916
    • View Profile
Re: Finishing
« Reply #3 on: December 09, 2012, 09:39:20 pm »
Any finish sold in North America is food safe and non toxic once cured, keeping in mind the product is designed as a finish.
Dan In Southern California

math2010

  • Guest
Re: Finishing
« Reply #4 on: December 10, 2012, 07:14:12 am »
Last time, I used Varathane water base finish.
So, if I understand what you explain, it is safe for children when dry...

daliclimbs

  • Guest
Re: Finishing
« Reply #5 on: December 10, 2012, 09:22:50 am »
yes it will be non toxic. But understand that is only when it is "FULLY" cured. That could take some time depending on drying conditions. If you want something nontoxic right out of the gate you should go for a beeswax paste or butcherblock oil.

math2010

  • Guest
Re: Finishing
« Reply #6 on: December 10, 2012, 12:44:50 pm »
Thank you!
Where can you buy beeswax paste or butcherblock oil?

Offline TheMelster

  • ****
  • Sr. Member
  • Posts: 384
    • View Profile
Re: Finishing
« Reply #7 on: December 10, 2012, 01:03:51 pm »
http://www.toymakingplans.com/website/how-to/non-toxic-wood-toy-finish.html


you can lead a horse to water, but you can't make him drink.
« Last Edit: December 11, 2012, 07:29:04 pm by TheMelster »
GO PACK GO

Offline Rapid Roger

  • *****
  • Hero Member
  • Posts: 1468
  • Hutchinson, Kansas
    • View Profile
Re: Finishing
« Reply #8 on: December 10, 2012, 05:39:26 pm »
Thank you!
Where can you buy beeswax paste or butcherblock oil?


The best, quickest and cheapest place to get beeswax is in the plumbing department of any hardware store. Buy the wax ring that goes under toilet in the bathroom with indoor plumbing. It truly is pure beeswax.
As for butcher block oil try any paint department in a hardware or big box store or a wood working store like Rocklers or Woodcraft.

Rog
An ounce of responsablity is worth 10 pounds of state and fedral laws.

math2010

  • Guest
Re: Finishing
« Reply #9 on: December 11, 2012, 08:19:59 am »
I just don't figure how to take the wax ring that goes under the toilet and be able to put it on the wood... I'm really newbie at finishing...

Offline Rapid Roger

  • *****
  • Hero Member
  • Posts: 1468
  • Hutchinson, Kansas
    • View Profile
Re: Finishing
« Reply #10 on: December 11, 2012, 10:23:57 am »
I just don't figure how to take the wax ring that goes under the toilet and be able to put it on the wood... I'm really newbie at finishing...


If you will warm it up a bit (sit it in front of a heater or use a heat gun or hair dryer) you will notice it will become soft and a bit sticky. Now wrap a small rag around your index finger and rub some wax off of the ring  with the rag and rub the waxy rag onto the wood  and work it in well. Let it dry and sit up for a few minutes then buff with another dry rag until it becomes glossy.
Or you could put a chunk of the wax into a jar or empty tin can and sit it in an oven and melt it down to a liquid then add your oil  and again using a rag apply the mixture to the wood. CAREFUL, DON'T BURN YOURSELF!
The wax will seal the pores in the wood and give it a nice luster as well as being food safe and water proof.
HTH

Rog
An ounce of responsablity is worth 10 pounds of state and fedral laws.

math2010

  • Guest
Re: Finishing
« Reply #11 on: December 11, 2012, 12:45:22 pm »
Thank you! It's very interesting! I'll try that!!!

Offline mickey357

  • *****
  • Hero Member
  • Posts: 692
    • View Profile
Re: Finishing
« Reply #12 on: December 11, 2012, 01:11:24 pm »
Thanks for this post, I have learned something and will try it.
NEVER TOO OLD TO LEARN

ToverT

  • Guest
Re: Finishing
« Reply #13 on: December 18, 2012, 10:02:30 am »
I wonder if the Bee's wax (toilet wax ring) would work as a was for the scroll saw table??

Tommy T

Offline GrayBeard

  • *****
  • Hero Member
  • Posts: 7088
  • My DW 788 sends you HUGZZZZ from Missouri, USA!
    • View Profile
Re: Finishing
« Reply #14 on: December 18, 2012, 10:57:13 am »
Tommy, a wax ring for a toilet will cost about the same as a can of carnauba paste wax.

~~~GB~~~
I never really wanted to grow up....All I wanted was to be able to reach the cookie jar...and play with my DW 788

 

SMF

Teknoromi