« previous next »
Pages: [1]   Go Down

Author Topic: AMT Scroll saw  (Read 4016 times)

Offline Cnkcustoms02

  • *
  • Newbie
  • Posts: 11
    • View Profile
AMT Scroll saw
« on: April 14, 2017, 08:07:58 pm »
i've got a 22" AMT that was given to me by my wife's grandparents the thing works great was wondering if anyone else still had one of these or used one in the past and had any ideas or suggestions as to making it more user friendly for fretwork. i might have a machinist friend of mine take a gander at the blade holders and come up with something easier to use. just wondering if there were any ideas out there.
Logged
Talk low, Talk slow, And don't talk too much.
~John Wayne~

Offline DWSudekum

  • *****
  • Hero Member
  • Posts: 3677
    • View Profile
    • The DW Collection
Re: AMT Scroll saw
« Reply #1 on: April 14, 2017, 08:12:08 pm »
Not familiar with the brand.  Could you post a picture of the data plate?


DW
Logged
Life is tough, it is even tougher if you are stupid  -  John Wayne

Offline Cnkcustoms02

  • *
  • Newbie
  • Posts: 11
    • View Profile
Re: AMT Scroll saw
« Reply #2 on: April 14, 2017, 08:35:30 pm »
Correction 23"
Logged
Talk low, Talk slow, And don't talk too much.
~John Wayne~

Offline Cnkcustoms02

  • *
  • Newbie
  • Posts: 11
    • View Profile
Re: AMT Scroll saw
« Reply #3 on: April 14, 2017, 08:36:08 pm »
Here's the plate
Logged
Talk low, Talk slow, And don't talk too much.
~John Wayne~

Offline Cnkcustoms02

  • *
  • Newbie
  • Posts: 11
    • View Profile
Re: AMT Scroll saw
« Reply #4 on: April 14, 2017, 08:43:18 pm »
i took off the top bit because the bellows is shot and when i break a blade it makes alot of noise i'm going to put an aquarium pump or airbrush compressor hookup on it with some loc-line for a blower instead of the bellows this beats the crap out of my old ryobi 16'' from the early '90's lol
Logged
Talk low, Talk slow, And don't talk too much.
~John Wayne~

Offline Cnkcustoms02

  • *
  • Newbie
  • Posts: 11
    • View Profile
Re: AMT Scroll saw
« Reply #5 on: April 14, 2017, 09:15:27 pm »
heres a few more particulars for it
WARNING: ALWAYS KEEP ALERT. DO NOT ALLOW FAMILIARITY {GAINED FROM FREOUENT USE OF YOUR
SCROLL SAW) TO CAUSE A CARELESS MISTAKE. ALWAYS REMEMBER THAT A CARELESS FRACTION OF A
SECOND IS SUFFICIENT TO INFLICT SEVERE INJURY.
SPECIFICATIONS
1. Max. thickness of cut: 2-5/8"
2. Blade length: 5"
3. Throat: 23"
4. Stroke: 5,/8"
5. Cuts per minute: 172O/860(60H2)
6. Table size: 2O-1/2x1O
7. Table tilt: 0'-45'(Left)
8. Base size: 29-1/2x12-5/8
9. Net weight: 76LBS
10. Gross weight: B.6LBS
11 . Machine Dimensions: 32"x1 4"x14%"
12. Packing size: 36/2"x17 %"x16V2"
Logged
Talk low, Talk slow, And don't talk too much.
~John Wayne~

Offline DWSudekum

  • *****
  • Hero Member
  • Posts: 3677
    • View Profile
    • The DW Collection
Re: AMT Scroll saw
« Reply #6 on: April 14, 2017, 09:43:41 pm »
I have located the operator and parts manual for this saw.. a link to it it is attached.  This is a very old saw as scroll saws go.  It will be difficult if not impossible to find parts should you need to do so.

http://vintagemachinery.org/pubs/29/2828.pdf


DW
Logged
Life is tough, it is even tougher if you are stupid  -  John Wayne

Offline Cnkcustoms02

  • *
  • Newbie
  • Posts: 11
    • View Profile
Re: AMT Scroll saw
« Reply #7 on: April 14, 2017, 10:11:36 pm »
I actually have the book for it lol the owners treated this machine like gold before I got it just  I've got a buddy who has an at home machine shop that'll make anything I want just putting out feelers for ideas  8)
Logged
Talk low, Talk slow, And don't talk too much.
~John Wayne~

Offline DWSudekum

  • *****
  • Hero Member
  • Posts: 3677
    • View Profile
    • The DW Collection
Re: AMT Scroll saw
« Reply #8 on: April 14, 2017, 10:40:49 pm »
It looks like it was a decent enough saw when it was in production.  For the air, you can use a strong air pump ( aquarium ) and some tubing to blow the sawdust out of the way.  As for  the blade holders ... those I bet will have to be trial and error.


DW
Logged
Life is tough, it is even tougher if you are stupid  -  John Wayne

Offline Cnkcustoms02

  • *
  • Newbie
  • Posts: 11
    • View Profile
Re: AMT Scroll saw
« Reply #9 on: April 15, 2017, 09:11:05 am »
i have an air compressor for airbrushes that will work out well i think and as far as the blade holders go they are pretty simple i'm sure it wouldnt take much to make them a little easier to use just gotta spend some time doing it lol. i'd put the quality of the machine somewhere around that of grizzly's products. my wifes grandmother really did some beautiful work with it. i like how quiet is is compared to other machines i have used in the past well save for the cabinet it is sitting on right now that makes a really odd noise when i cut on it its acting like a drum but i digress thats just what came under it i'm currently looking for a design of stand i like
Logged
Talk low, Talk slow, And don't talk too much.
~John Wayne~
Pages: [1]   Go Up
« previous next »
 

SMF

Teknoromi

SMF Links

  1. XHTML
  2. RSS
  3. WAP2
  4. Theme by snrj