Author Topic: Blade Alignment on Hegner  (Read 1290 times)

Offline Maximzodal

  • *
  • Newbie
  • Posts: 1
    • View Profile
Blade Alignment on Hegner
« on: January 29, 2017, 12:42:38 pm »
I bought an old Hegner Multimax 2 and the blade is right up against the left side of the hole in the table. The hole is chewed so this has been a problem before I bought the saw.  There isn't enough movement of the blade clamps to remedy the problem.  Is there a way to adjust the table or arms so the blade can be away from the left side?

Thanks

Offline Jim Finn

  • *****
  • Hero Member
  • Posts: 507
    • View Profile
Re: Blade Alignment on Hegner
« Reply #1 on: January 29, 2017, 05:41:49 pm »
Call Advance3d Machinery.  They are US distributers for Hegners and good folks.
20"Hegner Polymax-3 (2008)
25"Hegner Multimax-3 (1986)

No PHD, just a  DD 214

 

SMF

Teknoromi