1
Introduce Yourself. / Re: New From Oklahoma
« on: August 30, 2023, 12:39:16 pm »
Welcome
Hope to see some of your creations soon.
Hope to see some of your creations soon.
News: Had a couple issues with the forum today. 1/19/2017. I believe I have them corrected now. Let me know if you have any trouble. Thanks.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Tutorials, Techniques and Tips / Re: Hegner Spares
« on: October 10, 2021, 01:32:52 pm »
Always good to save money.
Mark
Mark
3
Brag Forum / Re: Horse and Girl
« on: October 10, 2021, 03:22:48 am »
Rodney,
Nicely done. Lot of detail and I really like the finish.
Mark
Nicely done. Lot of detail and I really like the finish.
Mark
4
General Scroll Saw Talk / Re: Wen 3922 scroll saw
« on: October 09, 2021, 08:26:57 am »
This is from the WEN manual https://cdn.shopify.com/
Excessive vibration.
1. Machine speed set at a harmonic
frequency of the saw.
1. Adjust speed up or down to see if
issue is resolved.
2. Machine not secured to work surface. 2. Secure machine to work surface.
3. Incorrect blade tension. 3. Adjust blade tension (see p. 13).
4. Hold-down foot not being used. 4. Adjust hold-down foot to slightly
clear workpiece surface when cutting.
5. Loose fastener. 5. Check machine for loose fasteners.
6. Defective bearing. 6. Contact customer service at 1-800-232-1195
Hope this helps
Excessive vibration.
1. Machine speed set at a harmonic
frequency of the saw.
1. Adjust speed up or down to see if
issue is resolved.
2. Machine not secured to work surface. 2. Secure machine to work surface.
3. Incorrect blade tension. 3. Adjust blade tension (see p. 13).
4. Hold-down foot not being used. 4. Adjust hold-down foot to slightly
clear workpiece surface when cutting.
5. Loose fastener. 5. Check machine for loose fasteners.
6. Defective bearing. 6. Contact customer service at 1-800-232-1195
Hope this helps
5
Ask Steve a question. / more room
« on: October 09, 2021, 08:18:50 am »
Steve
After seeing todays news letter and all your test cuts I think you need a BIGGER office.
But really thank you for all the work you do for us.
Mark
After seeing todays news letter and all your test cuts I think you need a BIGGER office.
But really thank you for all the work you do for us.
Mark
6
The Coffee Shop / Re: Thanks Steve
« on: October 01, 2021, 10:31:31 am »
Good job BlueBird
Steve thanks for all the patterns and all you do.
Mark
Steve thanks for all the patterns and all you do.
Mark
7
Pattern Requests. / Re: Cribbage Template
« on: April 02, 2018, 02:42:44 pm »
You can try
http://www.rockler.com/search/go?w=cribbage%20templates
This is the Rockler web site. I got one for Christmas but have not used it yet.
Hope it helps
http://www.rockler.com/search/go?w=cribbage%20templates
This is the Rockler web site. I got one for Christmas but have not used it yet.
Hope it helps
8
General Scroll Saw Talk / Re: Which Glue
« on: December 04, 2017, 05:32:45 pm »
Thank you all for the response.
9
General Scroll Saw Talk / Which Glue
« on: December 03, 2017, 12:04:33 pm »
Greetings,
I am working on some "Monogram Swivel Top Boxes" Sheila Landry's design and started to think (big trouble for me)
why cant I take four pieces of 1/4" and glue them together to get the one" thick piece but alternate woods, Oak, Walnut, Cherry, Maple...
so there is a contrast. My question would be which glue to use so when it is cut you will not see it also which one does not interfere with finishes?
At present I am using Brazilian Cherry for the sides and Canary Wood for the top and bottom.
I am working on some "Monogram Swivel Top Boxes" Sheila Landry's design and started to think (big trouble for me)
why cant I take four pieces of 1/4" and glue them together to get the one" thick piece but alternate woods, Oak, Walnut, Cherry, Maple...
so there is a contrast. My question would be which glue to use so when it is cut you will not see it also which one does not interfere with finishes?
At present I am using Brazilian Cherry for the sides and Canary Wood for the top and bottom.
10
General Scroll Saw Talk / Re: font help please
« on: November 26, 2017, 09:25:07 am »
You might want to check Sheila's website www.sheilalandrydesigns.com
She has three font patterns SLD361 SLD 362 SLD 363.
They have upper and lower case as well as numbers.
Hope this helps.
Mark
She has three font patterns SLD361 SLD 362 SLD 363.
They have upper and lower case as well as numbers.
Hope this helps.
Mark
11
General Scroll Saw Talk / Coins
« on: November 18, 2017, 05:37:43 pm »
Just got my Signature coins today. I went with the tree and they came out fantastic.
Thank you Steve
Thank you Steve
12
General Scroll Saw Talk / Re: Mini man cave
« on: November 16, 2017, 12:33:33 pm »
Very nice workshop. Like the barn door.
13
General Scroll Saw Talk / Re: Grrrrr
« on: November 02, 2017, 04:32:47 pm »
"Gotta slow down relax be cool get on the right track"
Its not a race its a hobby have fun.
Its not a race its a hobby have fun.
14
The Coffee Shop / Re: Car tip???
« on: November 01, 2017, 01:48:54 pm »
I am already running on three cylinders can not afford to lose another
15
Introduce Yourself. / Re: New Member-Cumming,Ga.-
« on: November 01, 2017, 01:43:34 pm »
Hello Ron
Welcome to Scrollsaw Workshop. There are a lot people here with all kinds of help and information all you have to do is ask.
What kind of saw do you use?
Welcome to Scrollsaw Workshop. There are a lot people here with all kinds of help and information all you have to do is ask.
What kind of saw do you use?
