1
The Coffee Shop / Wondering about Scrollsaw Village web site being Down.... ?
« on: August 20, 2022, 05:55:45 pm »
Does anyone know why I cannot log into Scrollsaw Village? Seems to be down, but wonder why. Thanks.... Danny :+}
News: Had a couple issues with the forum today. 1/19/2017. I believe I have them corrected now. Let me know if you have any trouble. Thanks.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Brag Forum / Re: 3D Angels
« on: June 05, 2022, 01:56:26 pm »
Great looking.... Say what is the wood of these....? Danny :+}
3
Brag Forum / Re: Heart Ring Box
« on: June 05, 2022, 01:55:00 pm »
Wow! Wonderful looking Heart Box.... I have this on my To Do List....
Probably will not look as Rich as yours....................Well done...............Danny :+}
Probably will not look as Rich as yours....................Well done...............Danny :+}
4
Brag Forum / Re: Mantle Clook
« on: June 05, 2022, 01:53:35 pm »
I agree 100% that your Choice of Wood is Perfect for this style clock.
As I look at it I can see a Rich and Probably Expensive piece.
Great Scrolling. Neat and Clean..............Danny :+}
As I look at it I can see a Rich and Probably Expensive piece.
Great Scrolling. Neat and Clean..............Danny :+}
5
Brag Forum / Re: My First Project - Valentine for My Wife
« on: June 05, 2022, 01:50:07 pm »
Warm Greetings to Everyone....Old and New.... For being your First I say your Scrolling is going to be Great Soon. Danny :+}
6
General Scroll Saw Talk / Re: SPEAKING OF WHAT BLADE TO USE....:+}
« on: March 21, 2022, 06:52:18 pm »
Hey thar Nicole.... All you said I Believe in the Same thing. My Go to blade has been for Years the
FDUR#1.... Even cutting 3/4" Pine it will cut Faster than a #3 or #5.... My True Feelings at this time.
Danny :+}
FDUR#1.... Even cutting 3/4" Pine it will cut Faster than a #3 or #5.... My True Feelings at this time.
Danny :+}
7
General Scroll Saw Talk / Re: SPEAKING OF WHAT BLADE TO USE....:+}
« on: February 21, 2022, 08:13:16 am »
Thank You Rodney for your Comment. WE both sound a lot alike with our Choices. I have NEVER bought Pegas blades,
but after reading this I feel I Really want to. Thanks Again my Friend. Danny :+}
PS Oh yea I have Experimented with Spirals Several times with Bad LUCK each time. Maybe I need another Modern Lesson. Hint hint. Danny :+}
but after reading this I feel I Really want to. Thanks Again my Friend. Danny :+}
PS Oh yea I have Experimented with Spirals Several times with Bad LUCK each time. Maybe I need another Modern Lesson. Hint hint. Danny :+}
8
General Scroll Saw Talk / SPEAKING OF WHAT BLADE TO USE....:+}
« on: February 20, 2022, 06:04:07 pm »
Well I know. Its been a while now. I do not Ever Forget My Beginnings with this site back when Steve Started it 2007.
Was t he year I decided to get out of the Work Force....RETIRED.... Never regretted it. Anyway Steve has been a Blessing
to Thousands of Men, Women and Young peoples. I learned most everything about Scrolling from this site. Now I venture
into Others and have met so many Wonderful people from many Countries. Anyway I have a Question....I swear by FDUR#1 Blade....
Most Everything I Scroll I use this blade and It Long story short Is the Best for Normal thickness and Not into the Hard woods.
Was cutting a piece of 3/4" Good Pine earlier and My Favorite just didn't cut fast enough for me. So.... Yea UR #3 and #5 were TRIED.
All blades cut, but the NUMBER ONE CUT FASTER AND STAYED TRUE TO THE LINE THAN THE OTHERS. Well made me think. Yea do that.
Teeth on the UR5 are bigger and TO ME should cut faster. Nopper. Did not. #1 cut Faster. Anyway could I READ OTHERS opinions
on this subject? SORRY FOR SO LENGTHY.... Just Lil Ole Happily Retired Me.......Danny :+}
Was t he year I decided to get out of the Work Force....RETIRED.... Never regretted it. Anyway Steve has been a Blessing
to Thousands of Men, Women and Young peoples. I learned most everything about Scrolling from this site. Now I venture
into Others and have met so many Wonderful people from many Countries. Anyway I have a Question....I swear by FDUR#1 Blade....
Most Everything I Scroll I use this blade and It Long story short Is the Best for Normal thickness and Not into the Hard woods.
Was cutting a piece of 3/4" Good Pine earlier and My Favorite just didn't cut fast enough for me. So.... Yea UR #3 and #5 were TRIED.
All blades cut, but the NUMBER ONE CUT FASTER AND STAYED TRUE TO THE LINE THAN THE OTHERS. Well made me think. Yea do that.
Teeth on the UR5 are bigger and TO ME should cut faster. Nopper. Did not. #1 cut Faster. Anyway could I READ OTHERS opinions
on this subject? SORRY FOR SO LENGTHY.... Just Lil Ole Happily Retired Me.......Danny :+}
9
Brag Forum / Re: Redeeming Myself
« on: November 04, 2021, 10:45:25 am »
SURPRISE....SURPRISE.... I Really, really like the look of this Picture. Very well cut and finished. Danny :+}
10
Brag Forum / Re: Busy Weekend
« on: June 29, 2021, 03:53:55 pm »
Both are Eye Catchers. Very well cut. Lighthouse is just Beautiful.
Think I will cut the Dog one. Brother would just Love it. Thanks for showing.... Danny :+}
Think I will cut the Dog one. Brother would just Love it. Thanks for showing.... Danny :+}
11
Brag Forum / Re: Finally built myself a cart - HUGE improvement!
« on: March 17, 2021, 06:09:39 pm »
Hey Steve.... Danny here. Been away for some time now. I looked at all your pictures
And Wow! You have a Wonderful set up. I Envy you..................Danny :+}
And Wow! You have a Wonderful set up. I Envy you..................Danny :+}
12
General Scroll Saw Talk / Re: Neck pain
« on: March 15, 2021, 06:16:30 pm »
Just had to add My Reply.... YEA Make sure a Chair is Comfortable. I also use a Good Well Made Office Chair.
Make the table holding the Scroll Saw tilt towards you around 4 inches high in the back. Make sure your Chair
is at a level where your Elbows are Straight to the top of the Saw. Use Good Mag Glasses or Mag Light. I could
not get used to the mag light. Mag glasses are my go to. Lighting is Very Important. Overhead and Saw Light.
Have a Stereo system playing your favorite music. ETC.... Have a Good Ventilator System in your shop. Make
sure you either have a Good Dust Collector System Working Good or Have the dust blow into a Square Fan with
a Good filter taped on. Practice and Practice until you can cut a 90 without batting an eye. Nuff now.... Danny :+}
Make the table holding the Scroll Saw tilt towards you around 4 inches high in the back. Make sure your Chair
is at a level where your Elbows are Straight to the top of the Saw. Use Good Mag Glasses or Mag Light. I could
not get used to the mag light. Mag glasses are my go to. Lighting is Very Important. Overhead and Saw Light.
Have a Stereo system playing your favorite music. ETC.... Have a Good Ventilator System in your shop. Make
sure you either have a Good Dust Collector System Working Good or Have the dust blow into a Square Fan with
a Good filter taped on. Practice and Practice until you can cut a 90 without batting an eye. Nuff now.... Danny :+}
13
Brag Forum / Re: Embroidery work on a scroll saw
« on: December 09, 2019, 02:48:00 pm »
And a Double Wow Wow!! from me. Outstanding looking. Love the Lights.
Looks close to a real one. Fancy one for sure.... Danny >+}
Looks close to a real one. Fancy one for sure.... Danny >+}
14
Brag Forum / Re: Rose by Steve Good
« on: December 09, 2019, 02:44:22 pm »
And Another Great looking Scroll Project. From me its a Wow!
And also a Learning thing. Thanks for showing and offering
Your finishing Tips.... Danny :+}
And also a Learning thing. Thanks for showing and offering
Your finishing Tips.... Danny :+}
15
Brag Forum / Re: Elf on the shelf
« on: November 28, 2019, 12:10:21 pm »
And I just Love them. Makes me want to cut bunches for Our get together.... Thanks for showing.... Danny :+}
